How to facet frosty gemstone: Purple Dragonfly
29 هزار بار بازدید -
7 ماه پیش
-
Today i cut an amethyst
Today i cut an amethyst with frosty lines which shows a dragonfly . Firstly i started with create a shape for my desing. And then keeped with main facets. After the 3000 grid phase i added frosty facets with 1200 grid diamond lap. Final process was polishing. I used a polymer lap to polish faces smootly. then i transfered the gem to cut crown . After the transfer i cut main facets and tears. The table cutting was the hardest phase for me. But i am very happy about the result. This gem was prepared for a software engineer.Ready to fly to Istanbul. You can ask your questions or comment below the video . Also you can subscribe and support my page. Thanks for whatching.
https://www.gemologyproject.com/wiki/...
https://www.gemologyproject.com/wiki/...
7 ماه پیش
در تاریخ 1402/11/06 منتشر شده
است.
29,048
بـار بازدید شده