Troubleshooting Spark Pilot Intermittent Control Module Flame Signal and Ground
46.1 هزار بار بازدید -
4 سال پیش
-
I notice the gas boiler
I notice the gas boiler at times seems to spark longer than it should at times. Therefore I am testing the spark ignition control module for a flame signal. After verifying the flame signal current produces 5 microamps. I ohm out and check the continuity of the ground wire for the pilot control module. I change the ground wires' stake on connectors.
4 سال پیش
در تاریخ 1399/02/11 منتشر شده
است.
46,177
بـار بازدید شده