Centurion D5 electrical motor brush checking and motor assembling, how to a step by step guide

Centurion D5 Evo sliding gate motors are great motors to automate your steel sliding gate.
Over time maintenance is needed to be performed on the gate motor system.
1 of the wear and tear concerns is the electrical, bearings and electrical motor brush system.
Its quite simple, the bigger the steel sliding gate the quicker the carbon brushes will wear out.
If the gate motor installation is poorly done, then again the electrical motor brushes will wear out much quicker.
Centurion gate motors can run for years before significant wear is present on the carbon brushes.
electrical brushes should be inspected depending on daily operations of the steel sliding gate.
a domestic gate motor system brushes should be inspected every 5 years of operation.

Here is a complete guide on how to inspect, the brush system of a Centurion D5 evo sliding gate motor, electrical motor.

The electrical motor fitted inside a Centurion D5 evo sliding gate motor has the following specifications:
1. it is a 12 volt DC motor with a 2x brush system
2. The electrical motor is 120 watt and runs at a speed of 4100 rpm when not under load.
3. The electric motor has a dual bearing setup on the shaft.
4. maximum number of gate operations a day depends on power supply fitted, but a centurion cp84sm power supply rated at 1 amp will allow 150 gate openings a day.
5. The gearbox system determines at which speed the steel sliding gate will open. a normal opening speed is between 18 to 22 meters a minute.
6. The electrical motor has a duty cycle of 50%
7. The two bearings on the motor shaft are pressed on.
8. The brush system can be replaced as a unit.
9. A older electrical motor will have wear signs on the armature and at such a point, the armature should be cut down to eliminate grooves to allow for good brush seating.

Exquisite Security is well versed in the installation, repairs, maintenance/ servicing and troubleshooting of all types of gate motor systems.
This includes swing gate motor systems.
With 19 years of experience there is only one company who you need to call.
Call Pottie 0837782288 to assist with your Centurion gate motor systems.

https://www.exquisitesecurity.co.za/i...