BATTLEFIELD 1 THE RUNNER | Make Your Own Action Figure: The Runner from Battlefield 1
146 بار بازدید -
5 ماه پیش
-
Steps for Assembly:1. Prime pieces
Steps for Assembly:
1. Prime pieces that will be painted with a spray-on primer in a well ventilated space
2. Prepare colors and paint action figure bodies with two thin layers of paint (and several hours in between each layer).
3. Add additional weathering through the use of drybrushing and washcoats. I used a washcoat for Reikland Fleshshade to give things a bit of a grimy look.
4. Add a varnish layer to seal your paint work in and protect it from smudging and chipping. As before, ensure you are working in a well ventilated space. Allow to dry for 24 hours
Ebay Storefront: https://www.ebay.com/usr/kenob3448
As always, when utilizing hobby knives, boiling water, dremels, and other crafting tools, please always exercise caution. Star Wars Showcase assumes no liability for injuries related to the recreation of these toys.
1. Prime pieces that will be painted with a spray-on primer in a well ventilated space
2. Prepare colors and paint action figure bodies with two thin layers of paint (and several hours in between each layer).
3. Add additional weathering through the use of drybrushing and washcoats. I used a washcoat for Reikland Fleshshade to give things a bit of a grimy look.
4. Add a varnish layer to seal your paint work in and protect it from smudging and chipping. As before, ensure you are working in a well ventilated space. Allow to dry for 24 hours
Ebay Storefront: https://www.ebay.com/usr/kenob3448
As always, when utilizing hobby knives, boiling water, dremels, and other crafting tools, please always exercise caution. Star Wars Showcase assumes no liability for injuries related to the recreation of these toys.
5 ماه پیش
در تاریخ 1402/11/14 منتشر شده
است.
146
بـار بازدید شده