Battery Replacement for JBL LINK20 Bluetooth Speaker (How to DIY)
32.9 هزار بار بازدید -
4 سال پیش
-
This video explains how to
This video explains how to replace the battery of the JBL Link20 wireless Bluetooth speakers.
With the right tools this process is not very difficult and may take between 30 to 60 minutes, depending on your experience.
The tools used in this video are:
- Phillips screwdriver
- Tweezers
- Prying tool / pocket knife
It is required to remove the top and the bottom portions of the speaker. Then we remove the cloth, covering the transducers.
The battery is located underneath a metal plate, which is used to help dissipate the heat, which occurs during the battery charging process.
The battery can only be removed from the side though. So more disassembly is required.
Remember to reinstall the thermal pad after inserting the new battery. Also make sure the battery is sitting firmly in the case and does not move around.
With the right tools this process is not very difficult and may take between 30 to 60 minutes, depending on your experience.
The tools used in this video are:
- Phillips screwdriver
- Tweezers
- Prying tool / pocket knife
It is required to remove the top and the bottom portions of the speaker. Then we remove the cloth, covering the transducers.
The battery is located underneath a metal plate, which is used to help dissipate the heat, which occurs during the battery charging process.
The battery can only be removed from the side though. So more disassembly is required.
Remember to reinstall the thermal pad after inserting the new battery. Also make sure the battery is sitting firmly in the case and does not move around.
4 سال پیش
در تاریخ 1399/08/09 منتشر شده
است.
32,921
بـار بازدید شده