Wizardry Wood Burning with a Cricut Easy Press and Ammonium Chloride
34.6 هزار بار بازدید -
5 سال پیش
-
This week we did some
This week we did some wood burning with a vinyl stencil, a Cricut Easy Press and Ammonium Chloride .
Garrett came across this video on using ammonium chloride to brand wood and immediately ordered it from Amazon! It was a super easy technique with millions of possibilities. We used it to make these 3 cutting boards. So easy its like magic!
Mix 1tbsp ammonium chloride solution to about 1/2 cup of warm water. Stir until dissolved. Add 1 scoop of Thicken Up and let sit 3-5min. then heat it up with the easy press for about 5 mins at 350 degrees.
Stuff We Used:
Cricut Maker: https://amzn.to/2A16XKE
Vinyl: https://amzn.to/2TRw22d
Transfer Tape: https://amzn.to/2P5ic8M
Ammonium Chlorid: https://amzn.to/2PIOa07
Thicken Up: https://amzn.to/2DT7Xnb
Cricut EasyPress 2, 12x10 Inches: https://amzn.to/2PX7jba
We love to Do It Ourselves. You love to Do It Yourself. Let's Do It Together. New DIY Videos Every Week!
For more details visit: https://www.kandgmakeit.com/
Follow us on social:
- Instagram: Instagram: kandgmakeit
- Facebook: Facebook: KandGmakeit
Visit our website:
- https://www.kandgmakeit.com/
\\\\\ MUSIC \\\\\
■ ES_Leyendas (Instrumental Version) - Lu-Ni
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
Garrett came across this video on using ammonium chloride to brand wood and immediately ordered it from Amazon! It was a super easy technique with millions of possibilities. We used it to make these 3 cutting boards. So easy its like magic!
Mix 1tbsp ammonium chloride solution to about 1/2 cup of warm water. Stir until dissolved. Add 1 scoop of Thicken Up and let sit 3-5min. then heat it up with the easy press for about 5 mins at 350 degrees.
Stuff We Used:
Cricut Maker: https://amzn.to/2A16XKE
Vinyl: https://amzn.to/2TRw22d
Transfer Tape: https://amzn.to/2P5ic8M
Ammonium Chlorid: https://amzn.to/2PIOa07
Thicken Up: https://amzn.to/2DT7Xnb
Cricut EasyPress 2, 12x10 Inches: https://amzn.to/2PX7jba
We love to Do It Ourselves. You love to Do It Yourself. Let's Do It Together. New DIY Videos Every Week!
For more details visit: https://www.kandgmakeit.com/
Follow us on social:
- Instagram: Instagram: kandgmakeit
- Facebook: Facebook: KandGmakeit
Visit our website:
- https://www.kandgmakeit.com/
\\\\\ MUSIC \\\\\
■ ES_Leyendas (Instrumental Version) - Lu-Ni
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
5 سال پیش
در تاریخ 1398/02/20 منتشر شده
است.
34,673
بـار بازدید شده