Remove the Rotor / Flywheel without a special tool on a Yamaha Warrior 350
26.3 هزار بار بازدید -
2 سال پیش
-
Yamaha Warrior 350You don't need
Yamaha Warrior 350
You don't need a special tool to remove the Rotor / Flywheel, but you do need to be careful.
Bolts used to crank it out are m8-1.25
Don't rush the job and you'll do it without damage.
I also forgot to mention that normally when you remove the Rotor the idler gear usually comes right off.
Disclaimer: https://www.seevid.ir/c/mreinsmith/a...
You don't need a special tool to remove the Rotor / Flywheel, but you do need to be careful.
Bolts used to crank it out are m8-1.25
Don't rush the job and you'll do it without damage.
I also forgot to mention that normally when you remove the Rotor the idler gear usually comes right off.
Disclaimer: https://www.seevid.ir/c/mreinsmith/a...
2 سال پیش
در تاریخ 1401/11/18 منتشر شده
است.
26,355
بـار بازدید شده