Example of low compression scooter won't start
76.5 هزار بار بازدید -
12 سال پیش
-
Here is a good example
Here is a good example of low compression on a scooter. This scooter did start and run with only 90 psi of compression. However it did have a hard time starting, this was do to low compression. Normally with less then 100 psi the engine will not start do to lack of compression. This scooter should have compression of 130-165 psi. If you found this video helpful be sure to subscribe to our channel.
12 سال پیش
در تاریخ 1391/10/08 منتشر شده
است.
76,503
بـار بازدید شده