2 - Projection of Plane (Basics, Drawing Process & Solved Example) Explained in Engineering Drawing
19.1 هزار بار بازدید -
2 سال پیش
-
Projection of Plane covered by
Projection of Plane covered by following points in this video:
0. Projection
1. Projection of Plane
2. Projection of Plane Solved Problem
3. Projection of Plane with Animation
4. Projection of Plane in Engineering Drawing
5. Basics of Projection of Plane
6. Drawing of Projection of Plane
7. Procedure of Projection of Plane
8. Stages of Projection of Plane
Projection of Plane explained with following timestamp:
0:00 – Projection of Plane in Engineering Drawing lecture series
0:23 – Procedure for projection of plane
2:20 – Step 1 - Assume suitable conditions & Draw FV and TV of initial position
5:11 – Step 2 - Consider surface inclination & Draw FV and TV of 2nd step
6:16 – Step 3 - Consider side inclination & Draw final FV and TV
7:32 – Sequence for projection of plane
8:00 – Sequence for three stages
Chapter-wise detailed Syllabus of the Engineering Drawing / Engineering Graphics Course is as follows:
Chapter-1 Practice sheet in Engineering Graphics: Practice sheet in Engineering Graphics
System of Dimensioning, Dimensioning Methods, Short Cut Method to draw Pentagon, Equal Division of Line, Hexagon Drawing, Types of Lines and Applications of Lines.
Chapter-2 Engineering curves in Engineering Drawing: Engineering curves in Engineering Dra...
Types of Engineering Curves, Conic Section Curves, Ellipse, Parabola, Hyperbola, Ellipse by Concentric Method, Normal and Tangent to Ellipse, Ellipse by Parallelogram Method, Major and Minor Axis of Ellipse, Ellipse by Arc Circle Method, Ellipse by Directrix Focus Method, Parabola by Rectangle Method, Parabola by Parallelogram Method, Parabola by Tangent or Envelope Method, Parabola by Directrix Focus Method, Rectangular Hyperbola, Oblique Hyperbola, Hyperbola by Directrix Focus Method, Hyperbola by Foci and Vertices Method, Applications of Engineering Curves, Cycloid in Engineering Graphics, Epicycloid in Engineering Graphics, Hypocycloid Engineering Graphics, Involute of Triangle, Involute of Square, Involute of Circle, Involute of Line, Archimedean Spiral.
Chapter-3 Projection of Point: Projection of Point
Projection of Points, Examples on Projection of Points.
Chapter-4 Projection of Line: Projection of Line
Projection of Lines, Examples on Projection of Lines.
Chapter-5 Projection of Plane: Projections of Plane
Projection of Plane, Examples on Projection of Plane.
Chapter-6 Orthographic Projection in Engineering Drawing: Orthographic Projection in Engineerin...
Orthographic Projection, Examples on Orthographic Projection, Basics of Orthographic Projection, First Angle Projection in Orthographic Projection, Front View and Top View in Orthographic Projection, Imagination in Orthographic Projection, Left Hand Side View in Orthographic Projection, Right Hand Side View in Orthographic Projection, Section Orthographic Projection, Sectioning Rule in Orthographic Projection, Cutting Planes in Orthographic Projection.
Chapter-7 Loci of Points in Engineering Drawing: Loci of Points in Engineering Drawing
Loci of Points, Locus Mechanism in Loci of Points, Slider Mechanism in Loci of Points, Slider Crank Mechanism in Loci of Points, Offset Slider Mechanism in Loci of Points, Four Bar Mechanism in Loci of Points, Locus of Four Bar Mechanism in Loci of Points.
Chapter-8 Projection of Solid in Engineering Drawing: Projection of Solid in Engineering Dr...
Projection of Solid, Terminologies in Projection of Solid, Steps of Projection of Solid, Examples on Projection of Solid, Two stage & Three stage examples on Projection of Solid, Pyramid, Prism, Cylinder, Cone examples with Projection of Solid.
Chapter-9 Plain Scale in Engineering Drawing: Plain Scale in Engineering Drawing
Plain Scale, Examples on Plain Scale, Types of Scale, Full Scale, Reduced Scale, Enlarge Scale, Isometric Scale, Normal Scale.
Chapter-10 AutoCAD in Engineering Drawing: AutoCAD in Engineering Drawing
AutoCAD, AutoCAD Commands, Circle, Rectangle, Chamfer, Line, Polyline, Hatch & Array.
Engineering Funda channel is all about Engineering and Technology. Here this video is a part of Engineering Drawing (Engineering Graphics and Design)
#Projection #Plane #PlaneProjection #ProjectionOfPlane #EngineeringDrawing
0. Projection
1. Projection of Plane
2. Projection of Plane Solved Problem
3. Projection of Plane with Animation
4. Projection of Plane in Engineering Drawing
5. Basics of Projection of Plane
6. Drawing of Projection of Plane
7. Procedure of Projection of Plane
8. Stages of Projection of Plane
Projection of Plane explained with following timestamp:
0:00 – Projection of Plane in Engineering Drawing lecture series
0:23 – Procedure for projection of plane
2:20 – Step 1 - Assume suitable conditions & Draw FV and TV of initial position
5:11 – Step 2 - Consider surface inclination & Draw FV and TV of 2nd step
6:16 – Step 3 - Consider side inclination & Draw final FV and TV
7:32 – Sequence for projection of plane
8:00 – Sequence for three stages
Chapter-wise detailed Syllabus of the Engineering Drawing / Engineering Graphics Course is as follows:
Chapter-1 Practice sheet in Engineering Graphics: Practice sheet in Engineering Graphics
System of Dimensioning, Dimensioning Methods, Short Cut Method to draw Pentagon, Equal Division of Line, Hexagon Drawing, Types of Lines and Applications of Lines.
Chapter-2 Engineering curves in Engineering Drawing: Engineering curves in Engineering Dra...
Types of Engineering Curves, Conic Section Curves, Ellipse, Parabola, Hyperbola, Ellipse by Concentric Method, Normal and Tangent to Ellipse, Ellipse by Parallelogram Method, Major and Minor Axis of Ellipse, Ellipse by Arc Circle Method, Ellipse by Directrix Focus Method, Parabola by Rectangle Method, Parabola by Parallelogram Method, Parabola by Tangent or Envelope Method, Parabola by Directrix Focus Method, Rectangular Hyperbola, Oblique Hyperbola, Hyperbola by Directrix Focus Method, Hyperbola by Foci and Vertices Method, Applications of Engineering Curves, Cycloid in Engineering Graphics, Epicycloid in Engineering Graphics, Hypocycloid Engineering Graphics, Involute of Triangle, Involute of Square, Involute of Circle, Involute of Line, Archimedean Spiral.
Chapter-3 Projection of Point: Projection of Point
Projection of Points, Examples on Projection of Points.
Chapter-4 Projection of Line: Projection of Line
Projection of Lines, Examples on Projection of Lines.
Chapter-5 Projection of Plane: Projections of Plane
Projection of Plane, Examples on Projection of Plane.
Chapter-6 Orthographic Projection in Engineering Drawing: Orthographic Projection in Engineerin...
Orthographic Projection, Examples on Orthographic Projection, Basics of Orthographic Projection, First Angle Projection in Orthographic Projection, Front View and Top View in Orthographic Projection, Imagination in Orthographic Projection, Left Hand Side View in Orthographic Projection, Right Hand Side View in Orthographic Projection, Section Orthographic Projection, Sectioning Rule in Orthographic Projection, Cutting Planes in Orthographic Projection.
Chapter-7 Loci of Points in Engineering Drawing: Loci of Points in Engineering Drawing
Loci of Points, Locus Mechanism in Loci of Points, Slider Mechanism in Loci of Points, Slider Crank Mechanism in Loci of Points, Offset Slider Mechanism in Loci of Points, Four Bar Mechanism in Loci of Points, Locus of Four Bar Mechanism in Loci of Points.
Chapter-8 Projection of Solid in Engineering Drawing: Projection of Solid in Engineering Dr...
Projection of Solid, Terminologies in Projection of Solid, Steps of Projection of Solid, Examples on Projection of Solid, Two stage & Three stage examples on Projection of Solid, Pyramid, Prism, Cylinder, Cone examples with Projection of Solid.
Chapter-9 Plain Scale in Engineering Drawing: Plain Scale in Engineering Drawing
Plain Scale, Examples on Plain Scale, Types of Scale, Full Scale, Reduced Scale, Enlarge Scale, Isometric Scale, Normal Scale.
Chapter-10 AutoCAD in Engineering Drawing: AutoCAD in Engineering Drawing
AutoCAD, AutoCAD Commands, Circle, Rectangle, Chamfer, Line, Polyline, Hatch & Array.
Engineering Funda channel is all about Engineering and Technology. Here this video is a part of Engineering Drawing (Engineering Graphics and Design)
#Projection #Plane #PlaneProjection #ProjectionOfPlane #EngineeringDrawing
2 سال پیش
در تاریخ 1400/12/10 منتشر شده
است.
19,133
بـار بازدید شده