How to Install a Chin Spoiler for a Mustang (2018-2023)
7.6 هزار بار بازدید -
پارسال
-
We are going over the
We are going over the steps to swap out the factory chin (front) spoiler to an aftermarket chin (front) spoiler on a 2021 Mustang GT (w/o Performance Pack). This is an easy process that can be done in your driveway using a service jack and jack stands.
1. After Shot - 0:05
2. Step 1 (Chock Rear Wheels) - 0:14
3. Step 2 (Lift Vehicle) - 0:24
4. Step 3 (Remove Lower Air Deflector Screws) - 1:38
5. Step 4 (Remove Lower Air Deflector Push Pins) - 2:28
6. Step 5 (Remove Fender-Liner Retainers) - 2:53
7. Step 6 (Remove Lower Air Deflector) - 3:26
8. Step 7 (Remove Lower Spoiler Push Pins) - 4:17
9. Step 8 (Remove Lower Spoiler Screws) - 4:43
10. Step 9 (Remove Lower Spoiler) - 5:21
11. Step 10 (Remove U-Nuts) - 5:38
12. Step 11 (Install U-Nuts) - 6:07
13. Step 12 (Install Lower Spoiler) - 6:44
14. Step 13 (Install Temp Spoiler Push Pins) - 7:19
15. Step 14 (Install Lower Spoiler Screws) - 7:38
16. Step 15 (Install New Spoiler Push Pins) - 9:21
17. Step 16 (Install M6 Bolt or New Push Pin) - 9:52
18. Step 17 (Remove Painter's Tape) - 10:40
19. Step 18 (Install Lower Air Deflector) - 11:04
20. Step 19 (Install Lower Air Deflector Push Pins) - 11:14
21. Step 20 (Install Lower Air Deflector Screws) - 11:22
22. Step 21 (Install Fender-Liner Retainers) - 11:45
23. Step 22 (Lower Vehicle) - 12:03
24. Step 23 (Remove Wheel Chocks) - 12:29
25. Show it off! - 12:59
CJ Pony "2015-2023 Mustang Jack and Jack Stand Points":
https://www.cjponyparts.com/resources...
Products Used:
This video contains affiliate links for which I may receive compensation.
MP Concepts Chin Spoiler - https://www.americanmuscle.com/mp-con...
M4.2-1.41(#8) U-Nut (GM 11513599 or W704823-S439) - https://amzn.to/3YG6Aii
Cowl & Fender Liner Clip Push Pins (GM 11589293 or W712196-S300) - https://amzn.to/47AWWkT
M6 x 16mm Flanged Screws - https://amzn.to/3sdILSJ
M6 Lock Nuts - https://amzn.to/3qxpafI
Black Nitrile Gloves - https://amzn.to/3lps6Vo
Cordless Drill and Impact Driver - https://amzn.to/44bKDIQ
Extension Bar Set - https://amzn.to/3OZBnmX
Painter's Tape - https://amzn.to/3MvGM1b
Semi-Permanent Threadlock - https://www.harborfreight.com/02-oz-r...
Trim Removal Tool Set - https://amzn.to/3hRQA8j
Universal Joint Set - https://amzn.to/458xtxN
Wheel Chocks - https://amzn.to/45sdXMj or https://www.harborfreight.com/solid-r...
Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
4mm Allen Key
Flat-Head Screwdriver
Jack & Jack Stands
Nitrile Gloves
Painter's Tape
Safety Glasses
Semi-Permanent Threadlock
Trim Removal Tools
Universal Joint
Wheel Chocks
#MPConcepts
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.
1. After Shot - 0:05
2. Step 1 (Chock Rear Wheels) - 0:14
3. Step 2 (Lift Vehicle) - 0:24
4. Step 3 (Remove Lower Air Deflector Screws) - 1:38
5. Step 4 (Remove Lower Air Deflector Push Pins) - 2:28
6. Step 5 (Remove Fender-Liner Retainers) - 2:53
7. Step 6 (Remove Lower Air Deflector) - 3:26
8. Step 7 (Remove Lower Spoiler Push Pins) - 4:17
9. Step 8 (Remove Lower Spoiler Screws) - 4:43
10. Step 9 (Remove Lower Spoiler) - 5:21
11. Step 10 (Remove U-Nuts) - 5:38
12. Step 11 (Install U-Nuts) - 6:07
13. Step 12 (Install Lower Spoiler) - 6:44
14. Step 13 (Install Temp Spoiler Push Pins) - 7:19
15. Step 14 (Install Lower Spoiler Screws) - 7:38
16. Step 15 (Install New Spoiler Push Pins) - 9:21
17. Step 16 (Install M6 Bolt or New Push Pin) - 9:52
18. Step 17 (Remove Painter's Tape) - 10:40
19. Step 18 (Install Lower Air Deflector) - 11:04
20. Step 19 (Install Lower Air Deflector Push Pins) - 11:14
21. Step 20 (Install Lower Air Deflector Screws) - 11:22
22. Step 21 (Install Fender-Liner Retainers) - 11:45
23. Step 22 (Lower Vehicle) - 12:03
24. Step 23 (Remove Wheel Chocks) - 12:29
25. Show it off! - 12:59
CJ Pony "2015-2023 Mustang Jack and Jack Stand Points":
https://www.cjponyparts.com/resources...
Products Used:
This video contains affiliate links for which I may receive compensation.
MP Concepts Chin Spoiler - https://www.americanmuscle.com/mp-con...
M4.2-1.41(#8) U-Nut (GM 11513599 or W704823-S439) - https://amzn.to/3YG6Aii
Cowl & Fender Liner Clip Push Pins (GM 11589293 or W712196-S300) - https://amzn.to/47AWWkT
M6 x 16mm Flanged Screws - https://amzn.to/3sdILSJ
M6 Lock Nuts - https://amzn.to/3qxpafI
Black Nitrile Gloves - https://amzn.to/3lps6Vo
Cordless Drill and Impact Driver - https://amzn.to/44bKDIQ
Extension Bar Set - https://amzn.to/3OZBnmX
Painter's Tape - https://amzn.to/3MvGM1b
Semi-Permanent Threadlock - https://www.harborfreight.com/02-oz-r...
Trim Removal Tool Set - https://amzn.to/3hRQA8j
Universal Joint Set - https://amzn.to/458xtxN
Wheel Chocks - https://amzn.to/45sdXMj or https://www.harborfreight.com/solid-r...
Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
4mm Allen Key
Flat-Head Screwdriver
Jack & Jack Stands
Nitrile Gloves
Painter's Tape
Safety Glasses
Semi-Permanent Threadlock
Trim Removal Tools
Universal Joint
Wheel Chocks
#MPConcepts
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.
پارسال
در تاریخ 1402/05/27 منتشر شده
است.
7,629
بـار بازدید شده