Make THIS VHF antenna easily | K7SW Ham Radio

Let me show you how YOU can Build a compact, simple VHF Yagi antenna for your HT.
Tell me in the comments below if you would make, or purchase an antenna like this for yourself.

Using my affiliate links in this description to purchase items seen in this video, costs you nothing more and helps to earn a small commission for the channel that supports making more Videos like this.
Thanks for watching 👍

Items needed to build this 2m Yagi
🔹 Archery Gripper https://geni.us/Ay9AXTH
🔹 Music Wire https://geni.us/mxzA
🔹 Music Wire Hobby Lobby https://geni.us/AwcD
🔹 32 inch Carbon Arrow (12pack) https://geni.us/6mLNq
🔹 Alligator clips https://geni.us/AxH9
🔹 RG174 3 foot coax sma to sma https://geni.us/8hoAl
🔹 1/2" Heat Shrink tube https://geni.us/KyvL
=========================================================
Measurements:
The Arrow Boom will be 32" long
Director element  = 36"
Driven elements   = 19.5" (each side) 39" total Length
Reflector element = 41.125

To mount the Elements:
From the rear of the boom measure 6" to the Reflector
From the rear of the boom measure 19" to the Driven element
From the rear of the boom measure 31" to the Director element

• #people_blogs
• #ht_antenna
• #ham_radio
• #vhf_ham_radio
• #wire_antennas
• #ham_antennas
• #portable_radio_operation
• #rv_ham_radio
• #mobile_ham_radio
• #summits_on_the_air
• #sota_radio
• #parks_on_the_air
• #ham_radio_contesting
• #handheld_ham_radio_for_beginners
• #handheld_ham_radio
• #handheld_ham_radio_antenna
• #vhf_yagi_antenna
• #antena_yagi_vhf