How To Properly Apply Threadlocker

We have noticed the bolts failing on some of the machines we have built (such as the CNC and Plastic Injection Machine), and after further investigation we found the issue to be in the way we applied the Loctite Threadlocker.

We made a quick video to demonstrate how to properly apply the thread locking fluid (thread locker) to threads in order to save you the trouble of failing screws in your builds.

Ways To Support Our Channel:
Merchandise: https://actionbox.ca/collections/merc...
Become A Member: @actionbox

We built a CNC Machine
Homemade CNC Machine! (6 months of wo...

We built a Wire EDM
How We Made A Wire EDM Machine At Home

We built an EDM Sinker
Homemade EDM Sinker

We built a Plastic Injection Machine
Homemade Plastic Injection Machine | DIY

We built an Anodizing Setup
Homemade Anodizing Setup

We built CNC Router
HOMEMADE CNC ROUTER.

#Loctite #Machine #Bolts #Nuts #DIY #CNC #tools #homemachineshop #shop #mechanical

• #
• #thread_locker
• #loctite
• #thread_lock
• #how_to_apply_threadlocker
• #threadlocker
• #threadlock
• #loctite_tricks