C RTK new products FROM CUAV
1 هزار بار بازدید -
6 سال پیش
-
CUAV C-RTK GPS Flight Controller
CUAV C-RTK GPS Flight Controller GPS with Protective Shell for PIX PX4 Pixhawk pixhack
High-precision positioning: Many drone applications require higher accuracy than traditional GNSS offerings, such as drone mapping, agricultural surveying, and high accuracy takeoff and landing.
C-RTK is a Real Time Kinematics module for mass market launched by CUAV. The complete RTK system can be composed of two C-RTK modules (one for aircraft and one for base station)
Small body, big power
Integrating the RTK GPS (M8P) + GNSS system dual positioning module and a COMPASS geomagnetic compass in just 53MMX32MM volume greatly reduces the need for aircraft installation volume, increases reliability and greatly reduces hardware costs.
CNC aviation aluminum alloy shell
C-RTK uses a CNC formed aluminum alloy shell, in addition to reducing external electromagnetic interference, reliability and durability also have some improvement
Double-ended design
The use of TYPE-C interface design, clever use of port redundancy design, the aircraft end and ground end only need to insert different specific data line can be double-ended switching, convenient and rapid iteration, reduce operating costs
Centimeter level positioning
Run advanced differential algorithm, so that the positioning accuracy of centimeter level positioning accuracy.
High-precision positioning: Many drone applications require higher accuracy than traditional GNSS offerings, such as drone mapping, agricultural surveying, and high accuracy takeoff and landing.
C-RTK is a Real Time Kinematics module for mass market launched by CUAV. The complete RTK system can be composed of two C-RTK modules (one for aircraft and one for base station)
Small body, big power
Integrating the RTK GPS (M8P) + GNSS system dual positioning module and a COMPASS geomagnetic compass in just 53MMX32MM volume greatly reduces the need for aircraft installation volume, increases reliability and greatly reduces hardware costs.
CNC aviation aluminum alloy shell
C-RTK uses a CNC formed aluminum alloy shell, in addition to reducing external electromagnetic interference, reliability and durability also have some improvement
Double-ended design
The use of TYPE-C interface design, clever use of port redundancy design, the aircraft end and ground end only need to insert different specific data line can be double-ended switching, convenient and rapid iteration, reduce operating costs
Centimeter level positioning
Run advanced differential algorithm, so that the positioning accuracy of centimeter level positioning accuracy.
6 سال پیش
در تاریخ 1397/02/03 منتشر شده
است.
1,060
بـار بازدید شده