SEAT High Speed Press line by Fagor Arrasate
5 هزار بار بازدید -
پارسال
-
Our 𝗵𝗶𝗴𝗵-𝘀𝗽𝗲𝗲𝗱 𝗽𝗿𝗲𝘀𝘀 𝗹𝗶𝗻𝗲𝘀 deliver
Our 𝗵𝗶𝗴𝗵-𝘀𝗽𝗲𝗲𝗱 𝗽𝗿𝗲𝘀𝘀 𝗹𝗶𝗻𝗲𝘀 deliver output ratings of up to 𝟭𝟳 𝘀𝗽𝗺 𝗶𝗻 𝗫𝗟-𝘁𝘆𝗽𝗲 press lines and up to 𝟮𝟭 𝘀𝗽𝗺 𝗶𝗻 𝗟-𝘁𝘆𝗽𝗲 ones. This high-speed lines - the 𝗪𝗮𝘃𝗲𝗟𝗶𝗻𝗲 𝗰𝗼𝗻𝗰𝗲𝗽𝘁 - have been developed to transfer large stamped parts, such as body sides, hoods, roofs and double-door units through large press tandem lines.
The WaveLine working mode concept allows presses to 𝗿𝘂𝗻 𝗶𝗻 𝗰𝗼𝗻𝘁𝗶𝗻𝘂𝗼𝘂𝘀 𝗺𝗼𝗱𝗲, reducing the drawing and cutting speed, and reducing the occupied space in the facility, as well as clutch and break maintenance tasks. 𝗧𝗵𝗲 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗼𝗻 𝗳𝗼𝗹𝗹𝗼𝘄𝘀 𝘁𝗵𝗲 𝗺𝗼𝘁𝗶𝗼𝗻 𝗼𝗳 𝘁𝗵𝗲 𝗽𝗿𝗲𝘀𝘀𝗲𝘀 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰𝗮𝗹𝗹𝘆, even when the line speed increases or decreases based on production demands. WaveLine installations are, in all cases, lines with short die setup times as well as powerful help on HMI for operation and maintenance tasks.
The total pressing force depends on the number of presses and the tonnage of each one. The head press is typically between 25,000kN and 20,000kN in XL lines and 20,000kN and 12,000kN in L lines and following presses are between 18,000kN and 10,000kN in XL lines and 8,000kN and 12,000kN in L lines.
Presses can be conventional mechanical or they can be servo-mechanical presses; or even a mix of both. The hybrid configuration allows the drawing performance to be improved, barely reducing the total part throughput.
This installations are capable of handling 4,300mm x 2,100mm blanks, weighing around 60 kg each. They are also able to work with double blanks with dimensions of 2,000mm x 2,100mm and 30 Kg each.
More information about our High Speed Press Lines: https://fagorarrasate.com/solution/hi...
The WaveLine working mode concept allows presses to 𝗿𝘂𝗻 𝗶𝗻 𝗰𝗼𝗻𝘁𝗶𝗻𝘂𝗼𝘂𝘀 𝗺𝗼𝗱𝗲, reducing the drawing and cutting speed, and reducing the occupied space in the facility, as well as clutch and break maintenance tasks. 𝗧𝗵𝗲 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗼𝗻 𝗳𝗼𝗹𝗹𝗼𝘄𝘀 𝘁𝗵𝗲 𝗺𝗼𝘁𝗶𝗼𝗻 𝗼𝗳 𝘁𝗵𝗲 𝗽𝗿𝗲𝘀𝘀𝗲𝘀 𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰𝗮𝗹𝗹𝘆, even when the line speed increases or decreases based on production demands. WaveLine installations are, in all cases, lines with short die setup times as well as powerful help on HMI for operation and maintenance tasks.
The total pressing force depends on the number of presses and the tonnage of each one. The head press is typically between 25,000kN and 20,000kN in XL lines and 20,000kN and 12,000kN in L lines and following presses are between 18,000kN and 10,000kN in XL lines and 8,000kN and 12,000kN in L lines.
Presses can be conventional mechanical or they can be servo-mechanical presses; or even a mix of both. The hybrid configuration allows the drawing performance to be improved, barely reducing the total part throughput.
This installations are capable of handling 4,300mm x 2,100mm blanks, weighing around 60 kg each. They are also able to work with double blanks with dimensions of 2,000mm x 2,100mm and 30 Kg each.
More information about our High Speed Press Lines: https://fagorarrasate.com/solution/hi...
پارسال
در تاریخ 1402/02/07 منتشر شده
است.
5,004
بـار بازدید شده