Disassembling and Cleaning the Tailstock and Spindle of the Emco Unimat SL Lathe
16.7 هزار بار بازدید -
2 سال پیش
-
The Emco Unimat SL is
The Emco Unimat SL is a small hobby engineer's lathe first made available in the 1950s. It features bed rails made from parallel round bars, a simple flexible design, and a huge range of accessories and add-ons which make it astonishingly versatile.
I'm between workshops for a few months, and I picked this lathe up second hand as a project I can work on with minimal space and equipment. In this video I spend some time disassembling the tailstock and the spindle, cleaning all the parts, and carefully removing corrosion from a few of the important areas.
Many thanks to Paul at The Knackler's Workshop for his series on a similar lathe. He really helped me know what I was getting myself into, and where to start. If you're impatient to find out more, go and watch his series while you wait for more videos from me.
The Knackler's Workshop:
theknacklersworkshop
Paul's Unimat SL Playlist:
Emco Unimat SL - Restoration - Page 1...
Many thanks to Saar at smallathe, an entire channel focused on making things with the Unimat SL, who gave me some vital pointers on rebuilding the Unimat SL spindle.
smallathe:
@smallathe
00:00 Introduction
00:17 Disassembling the tailstock
01:51 Cleaning the tailstock parts
05:47 Disassembling the spindle
09:22 Ultrasonic cleaning the spindle parts
11:27 Looking at the chuck
12:44 Removing the rust
Edited with:
Davinci Resolve 7.4.6
Audacity 3.1.3
Music:
Easy Lemon by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: https://incompetech.com/music/royalty...
Artist: http://incompetech.com/
I'm between workshops for a few months, and I picked this lathe up second hand as a project I can work on with minimal space and equipment. In this video I spend some time disassembling the tailstock and the spindle, cleaning all the parts, and carefully removing corrosion from a few of the important areas.
Many thanks to Paul at The Knackler's Workshop for his series on a similar lathe. He really helped me know what I was getting myself into, and where to start. If you're impatient to find out more, go and watch his series while you wait for more videos from me.
The Knackler's Workshop:
theknacklersworkshop
Paul's Unimat SL Playlist:
Emco Unimat SL - Restoration - Page 1...
Many thanks to Saar at smallathe, an entire channel focused on making things with the Unimat SL, who gave me some vital pointers on rebuilding the Unimat SL spindle.
smallathe:
@smallathe
00:00 Introduction
00:17 Disassembling the tailstock
01:51 Cleaning the tailstock parts
05:47 Disassembling the spindle
09:22 Ultrasonic cleaning the spindle parts
11:27 Looking at the chuck
12:44 Removing the rust
Edited with:
Davinci Resolve 7.4.6
Audacity 3.1.3
Music:
Easy Lemon by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: https://incompetech.com/music/royalty...
Artist: http://incompetech.com/
2 سال پیش
در تاریخ 1401/04/04 منتشر شده
است.
16,767
بـار بازدید شده