URU SUBMACHINE GUN NON- FIRING DUMMY. DETAILS OF THE FUNCTION AND FIELD STRIP
1.1 میلیون بار بازدید -
2 سال پیش
-
AGAIN, THIS IS A NON
AGAIN, THIS IS A NON FIRING TOY AND WILL REMAIN AS SUCH- NO TRUNION, BARREL OR COMPLETE BOLT /FIRING PIN. IT IS MADE OF SOFT MILD STEEL, LITERALLY HARDWARE STORE PIPES AND TUBING. NO TEMPER OR HARDENING...
Just wanted to post a close-up of the relationship of the selector and trigger/sear/disconnect interplay.
Note in SA position the disconnect rear sear comes up to catch the bolt when trigger is depressed. Let go - and the bolt loudly jumps to the main sear.
In A position - both sears stays down as a selector cam lobe keeps them there.
I tried to make a very simple relationship and the assembly of upper and lower.
The only screws I have- 2 for the flat trigger spring+guard and one screw that attaches the pistol grip+ trigger guard.
Those don,t need to come off.
Thanks for watching
Just wanted to post a close-up of the relationship of the selector and trigger/sear/disconnect interplay.
Note in SA position the disconnect rear sear comes up to catch the bolt when trigger is depressed. Let go - and the bolt loudly jumps to the main sear.
In A position - both sears stays down as a selector cam lobe keeps them there.
I tried to make a very simple relationship and the assembly of upper and lower.
The only screws I have- 2 for the flat trigger spring+guard and one screw that attaches the pistol grip+ trigger guard.
Those don,t need to come off.
Thanks for watching
2 سال پیش
در تاریخ 1401/08/05 منتشر شده
است.
1,141,281
بـار بازدید شده