BMW E60 M5 / M6 S85 Throttle Actuator & Idle Actuator DIY

This E39Source DIY demonstrates how to replace the throttle actuators and idle actuators motors on the 2006-2010 BMW E60 M5, E63/E64 M6 S85 V10.  

Buy BMW Parts:  https://bit.ly/2MPZSB3

PARTS:

(2)  Throttle Actuator:   13627834494
(2)  Idle Actuator:  13417834495
(2)  Idle Actuator Gasket:  13417836405
(1)  Idle Actuator Hose:  13417837711
(1)  Idle Actuator Hose:  13417837712
(2)  Idle Actuator Hose Clamp:  64218367179
(6)  Idle Actuator Nut:  07129905471
(10)  If Needed:  Plenum Bottom Hose:  11617834685
(10)  If Needed:  Plenum Bottom Hose Clamp:  11617835320

TORQUES:  

Throttle Actuator to Engine Block:  89in/lb
Idle Actuator to Engine Block:  89in/lb
17mm Starter and Jump Nuts:  18.4lb/ft
Wiring Harness to Engine:  89in/lb
Ionic Module Cover to Cylinder Head:  89in/lb

DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission.

E39Source website:  http://www.e39source.com

Help support E39Source by donating:  http://www.e39source.com/donate

• #autos_vehicles
• #e39source