DIY Stainless Wire Balustrade Tensioned with lag screw swage studs
19.8 هزار بار بازدید -
13 سال پیش
-
http://www.aaametalsuppliers.com.au/s...
These easy to follow steps have helped hundreds of people install an economical stainless wire balustrade into timber posts. Our DIY System L uses lag screw swage studs as the anchor points. The swage studs are hydraulically swaged onto the wire using an hand held hydraulic swaging tool. The 3.2mm 1x19 brightly polished stainless wire rope is tensioned by turning the lag screws into the post. All components and tools available from AAA Metal Suppliers.
These easy to follow steps have helped hundreds of people install an economical stainless wire balustrade into timber posts. Our DIY System L uses lag screw swage studs as the anchor points. The swage studs are hydraulically swaged onto the wire using an hand held hydraulic swaging tool. The 3.2mm 1x19 brightly polished stainless wire rope is tensioned by turning the lag screws into the post. All components and tools available from AAA Metal Suppliers.
13 سال پیش
در تاریخ 1391/01/01 منتشر شده
است.
19,852
بـار بازدید شده