Laminate Sample #41: Light E-Glass on 3mm Nomex Honeycomb
27.5 هزار بار بازدید -
3 سال پیش
-
Here's one that's pretty light
Here's one that's pretty light - the lightest one yet! My goal was to show how a simple one-shot process can get you a very decent result with honeycomb and bagged wet layup. The light glass helps with visibility, but you could substitute carbon for a stiffer panel of the same weight. Spread-tow would be a good choice!
The process is similar to Laminate Sample #15 which also uses the layup on sheet plastic method. Its wasteful but it saves lots of trouble handling (and making a mess of) unsupported cloth.
The video also touches on the directional nature of honeycombs and how the L-direction is much stronger/stiffer than the W-direction. I show this using the "Binstron" - my super crappy bend tester. Science!
The process is similar to Laminate Sample #15 which also uses the layup on sheet plastic method. Its wasteful but it saves lots of trouble handling (and making a mess of) unsupported cloth.
The video also touches on the directional nature of honeycombs and how the L-direction is much stronger/stiffer than the W-direction. I show this using the "Binstron" - my super crappy bend tester. Science!
3 سال پیش
در تاریخ 1400/02/11 منتشر شده
است.
27,513
بـار بازدید شده