Clean and Replace Aluminum Parts in Collision Repair
2.3 هزار بار بازدید -
9 سال پیش
-
Use this Standard Operating Procedure
Use this Standard Operating Procedure to properly clean and replace aluminum parts using 3M™ Cubitron™ II and Scotch-Brite™ Durable Flex Belt abrasives. Remember to use the right adhesive, like 3M™ Panel Bonding Adhesive or Impact Resistant Structural Adhesive to reattach the part depending on OEM recommendations.
9 سال پیش
در تاریخ 1394/12/24 منتشر شده
است.
2,340
بـار بازدید شده