VK56 Engine Rebuild Part 8 (Installing Pistons, Rods, Main Bearings, Crank)

Ry the car guy
Ry the car guy
7.4 هزار بار بازدید - 2 سال پیش - Today we finally turn around!
Today we finally turn around! We got the block back from the machine shop and we can finally start reinstalling parts. In this video we tackle the Crank, Pistons, and the rear main seal.

This is going to be a long series so make sure you subscribe to the channel to keep up on new videos released every week. The VK56 is in plenty of cars including the Titan, Armada, Patrol, Pathfinder, NV, and Infiniti QX56. It's also common to swap these engines into an Xterra of Frontier! A swap is a great time to rebuild the engine so use these steps to prep your engine for your ride.

If you want to support the build, pick up one of the new 10mm T-shirts: https://represent.com/store/ry-the-ca...

Tools used in this video***:
Socket Set: https://amzn.to/3CK6SJ0
1/2 Inch Torque Wrench: https://amzn.to/3J34ZKb
1/4 Inch Torque Wrench : https://amzn.to/3saNfG0
Permatex Ultra Grey: https://amzn.to/34CyJys
Mineral Spirits: https://amzn.to/3J34ZKb
Breaker Bar: https://amzn.to/3p6w740
Torque Angle Meter: https://amzn.to/3B2vlJI

Check out the Official RTCG website! http://rtcg.tv

Music in this video:
Et Voila - Chris Haugen
The Thought of You- Track Tribe
Cruise - John Deley and the 41 Players
By the fireplace: Track Tribe


**This video is being performed by an experienced individual. Any attempt to repair automotive parts or its systems carries risk of personal injury or damage to property. Always follow safe practices when working on vehicles such as using safety glasses, jack stands, not wearing loose clothing, etc. No guarantee or warranty is implied by these videos. Use the information in this video at your own risk. If you don't think you can perform the job then do not attempt it.

***Any purchases you make using the links provided help to support the channel at no extra cost to you! As an Amazon Associate I earn from qualifying purchases.

Timestamps:
Intro: (0:00)
Main Bearing Install: (1:39)
Crank Install: (4:26)
Piston Install: (13:12)
Install rod to crank: (24:20)
Install rear main seal: (27:22)
Outro: (33:02)

#nissan #diy #vk56
2 سال پیش در تاریخ 1400/11/15 منتشر شده است.
7,473 بـار بازدید شده
... بیشتر