Cabinet assembly with VB fittings and DrillJig VB from Hettich, based on existing System 32 holes
78.3 هزار بار بازدید -
11 سال پیش
-
This video shows how to
This video shows how to assembly top and bottom panels to sided panels with System 32 hole lines in manual furniture production.
Before drilling the holes for the VB connecting fittings, the DrillJig VB drilling jig must be set up to meet individual requirements of the furniture construction. Basic settings depend on the panel thickness and on the chosen VB connecting fitting: Set the drilling depth and the hole distance to the top / bottom panel's edge according to the figures documented in the furniture fitting catalogues.
For all VB connecting fittings meeting dowels in System 32 hole lines, which are always 37mm from the side panel's edge, drilling is very quick and simple. The red stops to either side of the drilling jig can quickly be set.
For all dowel positions not measuring 37mm from the side panel's edge, these stops cannot be used. These drilling positions must be marked on the top / bottom panels in order to position DrillJig VB.
The basic jig settings remain the same as you proceed drilling for each VB connecting fitting: Set the sideway stop; position and tightly fix the DrillJig VB drilling jig to the top / bottom panel, then drill the cup holes using a standard power drill and the hexagon bit.
Once all cup holes have been drilled, the VB connecting fittings can be inserted and the top / bottom panel can be assembled with the side panels.
Find more information on DrillJig VB and other useful advices on http://www.hettich.com/.
---------------------------
This video, as well as all other videos in the "Production of carcass furniture with professional jigs", were produced in a project by students of the Berufskolleg für Technik in Ahaus, Germany. Script and realization by Peer Beykirch and Marco Jentzsch, editing by Manfred Ameis. Thanks for doing such a great job!
11 سال پیش
در تاریخ 1392/05/31 منتشر شده
است.
78,362
بـار بازدید شده