DIY CamperVan Plumbing with Camping World

#CampingWorldPartner

Today we are starting to get to work on the plumbing system in our new van. We’ve partnered up with our friends at @CampingWorld to bring you a DIY instructional video of how we did it. This video will be part one of a series showing how we put everything together. In this edition we install the main portion of our fresh water system including the holding tank with water fill and vent, as well as a Shurflo 12v water pump with strainer and silencer kit. Many of the products used in this video can be found at CampingWorld.com or at their retail locations throughout the country.

Here’s a list of all the parts shown in this video:

Shurflo 4048 High-Flow Water Pump:
https://click.linksynergy.com/deeplin...

Shurflo Pump Silencer Kit:
https://click.linksynergy.com/deeplin...

Ancor Auto Wire Stripper:
https://click.linksynergy.com/deeplin...

Ancor Single-Crimp Ratchet Tool:
https://click.linksynergy.com/deeplin...

Ancor Heat Shrink Disconnects, 16-14 AWG, Male:
https://click.linksynergy.com/deeplin...

Ancor Heat Shrink Disconnects, 12-10 AWG, Female:
https://click.linksynergy.com/deeplin...

- 40 gallon Fresh Water Holding Tank
- Aquor RV City Water Inlet (1/2” FNPT)
- 1/2” I.D. Strainer/Filter
- 1/2” I.D. Braided Nylon Tubing
- #6 Hose Clamps
- 1/2” NPT x 1/2” Hose Barb Nylon Elbows
- 1/2” NPT Nylon Hex Nipple
- 1-1/2” MNPT x 1/2” FNPT PVC Bushing
- Ancor Safety Duplex Cable
- KUS Water Level Sensor
- Apollo Pex Pinch Clamp Tool
- Tube/Pipe Cutter
- 1/2” Pex-B Pipe
- 1/2” Pex Poly Fittings:
  -  Female Swivel Elbow
  -  MNPT Adapter
  -  Ball Valve
  -  1/2” Pinch Clamps