Steam Turbine Bore Alignment with L-706 Bore Alignment System
1.3 هزار بار بازدید -
6 سال پیش
-
HLI Training video showing how
HLI Training video showing how to use the L-706 Bore Laser on steam and gas turbines to check the alignment of half bores, including:
- How to set up the A-502A Half-Bore Target Fixture using the A-501 Bore Sweep Unit.
- How to set up the A-502L Half-Bore Laser Fixture using the A-501 Bore Sweep Unit.
- How to install and use the T-218T Turbine Bore Target and R-1307-2.4ZB 2-Axis Readou.
- How to "buck-in" the L-706 Bore Laser
- How to use the A-1511 Wand Bore Fixture with the A-1519-2.4ZB 2-Axis Turbine Target to take data and how to perform the simple calculations to the data. These are nearly identical to the calculations done when using a piano wire.
- How to set up the A-502A Half-Bore Target Fixture using the A-501 Bore Sweep Unit.
- How to set up the A-502L Half-Bore Laser Fixture using the A-501 Bore Sweep Unit.
- How to install and use the T-218T Turbine Bore Target and R-1307-2.4ZB 2-Axis Readou.
- How to "buck-in" the L-706 Bore Laser
- How to use the A-1511 Wand Bore Fixture with the A-1519-2.4ZB 2-Axis Turbine Target to take data and how to perform the simple calculations to the data. These are nearly identical to the calculations done when using a piano wire.
6 سال پیش
در تاریخ 1397/08/22 منتشر شده
است.
1,309
بـار بازدید شده