how to hardware reset avtech dvr ?
287.4 هزار بار بازدید -
10 سال پیش
-
remove admin password
remove admin password
#avtech
#dvr
STEP1:Remove the DVR cover and find the chip resistor to reset the hardware
STPP2:The chip resistor is located on TP5/TP6, as indicated below:
STEP3:Disconnect the DVR power. Then, make the chip resistor short-circuited with a conductive object (such as forceps) as indicated below, and re-connect the power. Remove the conductive object when you hear a short beep sound, and wait till the DVR reboots.
#avtech
#dvr
STEP1:Remove the DVR cover and find the chip resistor to reset the hardware
STPP2:The chip resistor is located on TP5/TP6, as indicated below:
STEP3:Disconnect the DVR power. Then, make the chip resistor short-circuited with a conductive object (such as forceps) as indicated below, and re-connect the power. Remove the conductive object when you hear a short beep sound, and wait till the DVR reboots.
10 سال پیش
در تاریخ 1393/05/22 منتشر شده
است.
287,495
بـار بازدید شده