Choosing A New Dust Extractor For The Workshop
100.8 هزار بار بازدید -
4 سال پیش
-
In this video I choose
In this video I choose a new HVLP dust extractor for the workshop.
Links:
AXMINSTER AFFILIATE LINK (please note I receive a small commission on any purchases made after clicking this link, but you don't pay any extra - thank you!): https://bit.ly/axminsterKB
AXMINSTER AT254SB TABLE SAW REVIEW VIDEO: Axminster AT254SB / AW10BSB2 Table Sa...
MILWAUKEE BACKPACK VAC: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 18v SDS DRILL: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 18v MITRE SAW: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 12v IMPACT DRIVER: https://uk.milwaukeetool.eu/en-gb/m12...
Numatic NVD750 (Axminster) - https://www.tagserve.com/clickServlet...
Numatic HEPA Micro Filter (Axminster) - https://www.tagserve.com/clickServlet...
Numatic NVD750 (Axminster) - https://www.tagserve.com/clickServlet...
MY DUST EXTRACTION VIDEO: My New Workshop Dust Extraction System
0:00 Intro
0:20 Why I Need A New Extractor
4:02 Choosing The New Extractor
11:04 Set Up & First Impressions
This video is supported by Milwaukee, check out their full range here: https://uk.milwaukeetool.eu/?utm_sour...
I mentioned in a previous video that I needed an HVLP extractor in order to provide enough airflow (1000 cubic metres per hour) to my new table saw the Axminster AT254SB. So in this video I spend some time figuring out which extractor to buy out of the following options:
Axminster AC153E + cartridge filter
Axminster AC82E + cartridge filter
Axminster AT50E
Axminster AT60E
Axminster AT170E
Charnwood W696CF
Charnwood W691CF
Charnwood W796CF
Charnwood W791CF
SIP 01954 + cartridge filter
Fox F50-842
Laguna B Flux 1
iTech DC001 + cartridge filter
Draper 153L
The main considerations for me when choosing in order of importance were: Size - as small and compact as possible. Cost - I wanted to spend around £300 or maximum £500. Noise - as quiet as possible. Power - I wanted as much power as I could get for my money. And the extractor must have a cartridge / cannister style filter either with it or available to buy separately in order to provide better filtering of fine dust particles (e.g. 1 micron filter). I also set up the extractor, add some ducting and give a first impressions style review of the Charnwood W796CF
#woodworking #workbench #drawers
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
HELP SUPPORT THE CHANNEL:
Support with YouTube channel membership: @ragnbonebrown
Support with Patreon: Patreon: ragnbonebrown
Support with PayPal http://paypal.me/ragnbonebrown
MY TOOLS:
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: https://www.amazon.co.uk/shop/ragnbon...
US affiliate store: https://www.amazon.com/shop/ragnboneb...
SHOP:
Etsy: http://www.etsy.com/uk/shop/KeithBrow...
https://teespring.com/stores/rag-n-bo...
LINKS:
Website: http://www.ragnbonebrown.com
Facebook: Facebook: ragnbonebrown
Instagram: @ragnbonebrown
Twitter: Twitter: ragnbonebrown
Email: [email protected]
Second YouTube Channel (non woodwork videos): keefykeef
Links:
AXMINSTER AFFILIATE LINK (please note I receive a small commission on any purchases made after clicking this link, but you don't pay any extra - thank you!): https://bit.ly/axminsterKB
AXMINSTER AT254SB TABLE SAW REVIEW VIDEO: Axminster AT254SB / AW10BSB2 Table Sa...
MILWAUKEE BACKPACK VAC: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 18v SDS DRILL: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 18v MITRE SAW: https://uk.milwaukeetool.eu/en-gb/m18...
MILWAUKEE 12v IMPACT DRIVER: https://uk.milwaukeetool.eu/en-gb/m12...
Numatic NVD750 (Axminster) - https://www.tagserve.com/clickServlet...
Numatic HEPA Micro Filter (Axminster) - https://www.tagserve.com/clickServlet...
Numatic NVD750 (Axminster) - https://www.tagserve.com/clickServlet...
MY DUST EXTRACTION VIDEO: My New Workshop Dust Extraction System
0:00 Intro
0:20 Why I Need A New Extractor
4:02 Choosing The New Extractor
11:04 Set Up & First Impressions
This video is supported by Milwaukee, check out their full range here: https://uk.milwaukeetool.eu/?utm_sour...
I mentioned in a previous video that I needed an HVLP extractor in order to provide enough airflow (1000 cubic metres per hour) to my new table saw the Axminster AT254SB. So in this video I spend some time figuring out which extractor to buy out of the following options:
Axminster AC153E + cartridge filter
Axminster AC82E + cartridge filter
Axminster AT50E
Axminster AT60E
Axminster AT170E
Charnwood W696CF
Charnwood W691CF
Charnwood W796CF
Charnwood W791CF
SIP 01954 + cartridge filter
Fox F50-842
Laguna B Flux 1
iTech DC001 + cartridge filter
Draper 153L
The main considerations for me when choosing in order of importance were: Size - as small and compact as possible. Cost - I wanted to spend around £300 or maximum £500. Noise - as quiet as possible. Power - I wanted as much power as I could get for my money. And the extractor must have a cartridge / cannister style filter either with it or available to buy separately in order to provide better filtering of fine dust particles (e.g. 1 micron filter). I also set up the extractor, add some ducting and give a first impressions style review of the Charnwood W796CF
#woodworking #workbench #drawers
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
HELP SUPPORT THE CHANNEL:
Support with YouTube channel membership: @ragnbonebrown
Support with Patreon: Patreon: ragnbonebrown
Support with PayPal http://paypal.me/ragnbonebrown
MY TOOLS:
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: https://www.amazon.co.uk/shop/ragnbon...
US affiliate store: https://www.amazon.com/shop/ragnboneb...
SHOP:
Etsy: http://www.etsy.com/uk/shop/KeithBrow...
https://teespring.com/stores/rag-n-bo...
LINKS:
Website: http://www.ragnbonebrown.com
Facebook: Facebook: ragnbonebrown
Instagram: @ragnbonebrown
Twitter: Twitter: ragnbonebrown
Email: [email protected]
Second YouTube Channel (non woodwork videos): keefykeef
4 سال پیش
در تاریخ 1399/06/28 منتشر شده
است.
100,810
بـار بازدید شده