Make A Three Piece Fibreglass Mother Mold | Full Series
2.2 هزار بار بازدید -
5 سال پیش
-
Part One:
Part One: 0:00
In this part we concentrate on making the seams with aluminium foil, applying the release agent with consists of Carnauba wax and PVA solution.
Part Two: 06:12
In this part we lay up the fibreglass layers using polyester laminating resin, MEKP catalyst and strand matting.
Part Three: 14:33
In this part we attach the legs to the main fibreglass mother mold using pieces of wood for the legs.
Part Four: 19:27
The final part in this series of making a three-piece fibreglass mother mold. In this video, we trim the legs, drill the holes to fix the bolts in place and clean up!
If you enjoyed this video, please like and share. :)
Hit the notification bell if you would like to receive notifications of new videos. :)
Any comments, please post below. :)
Subscribe at: dramamask2011
Website: http://www.dramamaskevolution.com
Facebook: Facebook: dramamaskevolution
Twitter: Twitter: dramamask
Instagram: Instagram: dramamask1973
Ebay: http://www.ebay.co.uk/usr/dramamaskev...
Etsy: https://www.etsy.com/uk/shop/Dramamas...
Steemit: https://steemit.com/@dramamask
Music by Angel Rust.
Dramamask Evolution's Amazon Storefront featuring materials used in Dramamask Evolution YouTube videos: https://www.amazon.co.uk/shop/dramama...
For molding and casting enthusiasts, please visit: http://www.diymolds.com
Other videos:
Part One | Make A Celtic Mirror | Building The Model: Part One | Make A Celtic Mirror | Bui...
Make A Mystical RGB LED Light Wall Frame: Make A Mystical RGB LED Light Wall Frame
Make A Fairy Door With Clay: Make A Fairy Door With Monster Clay
3V LED Circuit With Switch: 3V LED Circuit With Switch
Part One | Alien Sculpt | Building & Sculpting The Head: Part One | Alien Sculpt | Building & ...
Make A Concrete Leaf: Make A CONCRETE LEAF.
In this part we concentrate on making the seams with aluminium foil, applying the release agent with consists of Carnauba wax and PVA solution.
Part Two: 06:12
In this part we lay up the fibreglass layers using polyester laminating resin, MEKP catalyst and strand matting.
Part Three: 14:33
In this part we attach the legs to the main fibreglass mother mold using pieces of wood for the legs.
Part Four: 19:27
The final part in this series of making a three-piece fibreglass mother mold. In this video, we trim the legs, drill the holes to fix the bolts in place and clean up!
If you enjoyed this video, please like and share. :)
Hit the notification bell if you would like to receive notifications of new videos. :)
Any comments, please post below. :)
Subscribe at: dramamask2011
Website: http://www.dramamaskevolution.com
Facebook: Facebook: dramamaskevolution
Twitter: Twitter: dramamask
Instagram: Instagram: dramamask1973
Ebay: http://www.ebay.co.uk/usr/dramamaskev...
Etsy: https://www.etsy.com/uk/shop/Dramamas...
Steemit: https://steemit.com/@dramamask
Music by Angel Rust.
Dramamask Evolution's Amazon Storefront featuring materials used in Dramamask Evolution YouTube videos: https://www.amazon.co.uk/shop/dramama...
For molding and casting enthusiasts, please visit: http://www.diymolds.com
Other videos:
Part One | Make A Celtic Mirror | Building The Model: Part One | Make A Celtic Mirror | Bui...
Make A Mystical RGB LED Light Wall Frame: Make A Mystical RGB LED Light Wall Frame
Make A Fairy Door With Clay: Make A Fairy Door With Monster Clay
3V LED Circuit With Switch: 3V LED Circuit With Switch
Part One | Alien Sculpt | Building & Sculpting The Head: Part One | Alien Sculpt | Building & ...
Make A Concrete Leaf: Make A CONCRETE LEAF.
5 سال پیش
در تاریخ 1398/09/07 منتشر شده
است.
2,211
بـار بازدید شده