Wye(Star)-Delta Closed Transition Starter using FluidSim v3.6

Here is a control system for the starter wye-delta in a closed transition. If you want to do the Control System please make sure that the label of the Contactor and its Coil is the same for it to act simultaneously with respect to when the Contactor Coil is energized. You can label it by double clicking and type the desired label for it. Also, make sure the Contactors if it's Normally Open or Closed. Message me if you have a better idea, suggestions, or thoughts. You can contact me if you have some questions. I also made an artificial three phase connection to illustrate the current flow. It is only for aesthetic purposes. In order for it to work, I series a lamp for every line to avoid short circuiting. Pardon for the tons of superimposed lines. Take Note: Focusing in the artificial three-phase windings, the current flow in the artificial winding looks like it's not in closed transition but the Control System is on a closed transition set-up. I created this when I was still studying so idk, just want to share it. Thanks if you like it. :D Pardon also for the wrong grammars hehe... Here, I am using Festo FluidSim v3.6 Thank you for watching!

• #science_technology
• #wyedelta
• #stardelta
• #wye
• #delta
• #star
• #close
• #closed
• #transition
• #closed_transition
• #starter
• #three
• #phase
• #fluidsim
• #sluid_sim
• #v36
• #36
• #control
• #system
• #circuit