PART 2 C10 5" FRONT DROP | CUT COIL SPRINGS AND DROP SPINDLES
71.6 هزار بار بازدید -
10 سال پیش
-
For more pictures and information
For more pictures and information on my projects, please check out my Facebook and Instagram pages!
FACEBOOK: www.facebook.com/milkcrate82/
INSTAGRAM: www.instagram.com/milkcrate82/
In this video series, I'm doing a 5" drop on the front of my 1977 Chevy squarebody C10. I will be cutting the stock, original coil springs netting roughly a 2" to 2.5" drop from the coil springs. I will also be using 2.5" drop spindles that I purchased from Chassis Tech.. I am also using tubular DJM upper control arms and new factory lower control arms. The front drop shocks are from CPP. The whole front suspension and steering will be new when I am finished.
Click this link for the 7" rear drop video series!
• PART 1 C10 7" REAR DROP | FLIP KIT AN...
For the rear drop, I will be using a axle flip kit from Belltech. I am also installing all new urethane bushings from Energy Suspension in both ends of the stock leaf springs as well as the factory spring shackles. While I'm at it, I remove a few of the individual leaves from the leaf spring pack to reduce the spring rate to smooth out the ride. I am also using Belltech drop shocks in the rear.
10 سال پیش
در تاریخ 1393/06/25 منتشر شده
است.
71,636
بـار بازدید شده