Get better POV footage on your motorcycle GoPro
31.2 هزار بار بازدید -
4 سال پیش
-
After some trial and error,
After some trial and error, I figured out one of the best ways to get a better POV when shooting GoPro footage on your motorcycle. This mount setup will work on most bikes and this setup that I'm showing is specifically for doing the gas tank style mount on an R3. The only improvement I can see if getting the view just a little bit higher, I might find some extension to add, what do you guys think?
Parts Needed:
RAM Mounts Ball Head Base - https://bit.ly/34ed9N3
RAM Mounts Double Socket - https://bit.ly/3jlD8bO
RAM Mounts Action Camera Ballhead - https://bit.ly/36nw2zW
M5-0.8 x 55 mm Bolt - https://thd.co/36rzWaT
M6 Washer - https://thd.co/3jmC9Ib
If you have a larger bike, you can skip the ball head base mount and M5/M6 bolt and washers and just get one of these:
RAM Mounts Gas Tank - https://bit.ly/2Sfs7gf
Tool(s) Needed:
4mm Allen/Hex
Parts Needed:
RAM Mounts Ball Head Base - https://bit.ly/34ed9N3
RAM Mounts Double Socket - https://bit.ly/3jlD8bO
RAM Mounts Action Camera Ballhead - https://bit.ly/36nw2zW
M5-0.8 x 55 mm Bolt - https://thd.co/36rzWaT
M6 Washer - https://thd.co/3jmC9Ib
If you have a larger bike, you can skip the ball head base mount and M5/M6 bolt and washers and just get one of these:
RAM Mounts Gas Tank - https://bit.ly/2Sfs7gf
Tool(s) Needed:
4mm Allen/Hex
4 سال پیش
در تاریخ 1399/07/16 منتشر شده
است.
31,292
بـار بازدید شده