Replacing C3 Corvette SPARK PLUG WIRES
1.2 هزار بار بازدید -
2 هفته پیش
-
A comprehensive how-to video for
A comprehensive how-to video for the DIY mechanic on properly removing, then installing, 8mm pre-cut spark plug wires on a 1981 C3 Corvette, information that applies to most C3s.
This is an involved job that can be done by the home mechanic with simple tools and a ton of patience.
I cover removing the engine block plug wire shields, how to remove the old wires, SBC V8 firing order, how to prepare wires and easily run them per factory recommendations between the engine mount and engine block, how to install 4-hole grommets to protect wires from chafing.
Plus tips on installing the distributor wire retainer ring, using dielectric grease to make installation of wire boots easy and effective, reinstalling the distributor shield, and so much more.
And most importantly, spark plug wire lengths and which cylinder they should be connected to.
This 45-minute video is a must-watch masterclass on everything related to spark plug wires for C3 Corvettes.
I hope you find the video helpful.
Thank you for watching! 🙂👍🏻
======================================
CORVETTE PRODUCTS (sponsored)
- C3 Corvette Spark Plug Wires: https://amzn.to/3TLZy9s
- Truck Bed Coating Spray: https://amzn.to/3J3LLWQ
- Spark Pug Wire Separator Kit: https://amzn.to/3vEzpRX
- Seymour High Temp Paint: https://amzn.to/3TZmqnk
======================================
DISCLAIMER: Even though I like to wrench on my Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.
I am a self-taught DIYer. If videos appear to give technical how-to advice, that is not my intention.
Working on a vehicle can be dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a mechanic.
#c3corvette #sparkplug
This is an involved job that can be done by the home mechanic with simple tools and a ton of patience.
I cover removing the engine block plug wire shields, how to remove the old wires, SBC V8 firing order, how to prepare wires and easily run them per factory recommendations between the engine mount and engine block, how to install 4-hole grommets to protect wires from chafing.
Plus tips on installing the distributor wire retainer ring, using dielectric grease to make installation of wire boots easy and effective, reinstalling the distributor shield, and so much more.
And most importantly, spark plug wire lengths and which cylinder they should be connected to.
This 45-minute video is a must-watch masterclass on everything related to spark plug wires for C3 Corvettes.
I hope you find the video helpful.
Thank you for watching! 🙂👍🏻
======================================
CORVETTE PRODUCTS (sponsored)
- C3 Corvette Spark Plug Wires: https://amzn.to/3TLZy9s
- Truck Bed Coating Spray: https://amzn.to/3J3LLWQ
- Spark Pug Wire Separator Kit: https://amzn.to/3vEzpRX
- Seymour High Temp Paint: https://amzn.to/3TZmqnk
======================================
DISCLAIMER: Even though I like to wrench on my Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.
I am a self-taught DIYer. If videos appear to give technical how-to advice, that is not my intention.
Working on a vehicle can be dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a mechanic.
#c3corvette #sparkplug
2 هفته پیش
در تاریخ 1403/04/16 منتشر شده
است.
1,211
بـار بازدید شده