How-To. Using Launch Control in your BMW M with a Manual Transmission.
63.3 هزار بار بازدید -
3 سال پیش
-
In this video BMW M
In this video BMW M How-To shows you that, when the ambient conditions are dry, launch control permits optimised acceleration on a road surface that offers plenty of grip.
BMW M3 Sedan:
Fuel comsumption (combined) in l/100 km: 10,1-10,0 (WLTP)
CO2 emissions (combined) in g/km: 230-228 (WLTP)
n order to use launch control in your BMW M3 or BMW M4 with a manual transmission, the vehicle must be stationary, the engine running and at operating temperature. The steering angle at the steering wheel must not be greater than 30°. Activate the M Dynamic Mode by pressing the DSC button once. Press the clutch with the left foot and hold. Engage first gear. Press the accelerator pedal beyond the resistance point, and hold. An optimum engine speed for pulling away is adjusted. A check control message “Preparing Launch Control” is issued. When it says “Launch Control active”, take your left foot off the clutch pedal within 6 seconds to start. During the upshift, despite the release of the accelerator pedal during the gear change, the optimal charging pressure is maintained so that the full engine torque is available again immediately.
Check out the other videos in the BMW M How-To Series and be sure to leave us your feedback in the comments below.
The BMW Driver's Guide app specifically describes the equipment and functions included in the vehicle. The Owner's Handbook is available as an app in many countries. You will find further information on the Internet at: https://www.bmw.com/bmw_drivers_guide
BMW M3 Sedan:
Fuel comsumption (combined) in l/100 km: 10,1-10,0 (WLTP)
CO2 emissions (combined) in g/km: 230-228 (WLTP)
n order to use launch control in your BMW M3 or BMW M4 with a manual transmission, the vehicle must be stationary, the engine running and at operating temperature. The steering angle at the steering wheel must not be greater than 30°. Activate the M Dynamic Mode by pressing the DSC button once. Press the clutch with the left foot and hold. Engage first gear. Press the accelerator pedal beyond the resistance point, and hold. An optimum engine speed for pulling away is adjusted. A check control message “Preparing Launch Control” is issued. When it says “Launch Control active”, take your left foot off the clutch pedal within 6 seconds to start. During the upshift, despite the release of the accelerator pedal during the gear change, the optimal charging pressure is maintained so that the full engine torque is available again immediately.
Check out the other videos in the BMW M How-To Series and be sure to leave us your feedback in the comments below.
The BMW Driver's Guide app specifically describes the equipment and functions included in the vehicle. The Owner's Handbook is available as an app in many countries. You will find further information on the Internet at: https://www.bmw.com/bmw_drivers_guide
3 سال پیش
در تاریخ 1400/05/12 منتشر شده
است.
63,330
بـار بازدید شده