How to Install everydrop® Water and Ice Filter 1 EDR1RXD1

everydrop Refrigerator Water Filters
everydrop Refrigerator Water Filters
164.5 هزار بار بازدید - 3 سال پیش - How to install or replace
How to install or replace everydrop® Filter 1 (EDR1RXD1) for 6 months of clean, fresh tasting water.

Find the correct filter for your refrigerator at https://everydropwater.com.

The filter compartment for everydrop® Filter 1 is located in the upper right hand corner inside the refrigerator or in the base grille. Lift the filter door up, pull the filter out and discard it. Open your new filter and remove the protective covering from the O-rings. Make sure the O-rings are still in place have the cover has been removed. When inserting the new filter into the slot, make sure the arrow is pointing upward. Do not force the water filter. If it does not slide in easily, rotate it until the notches are properly aligned with the grooves. Push the filter door closed so it snaps into place. Flush the dispenser and you'll be ready for 6 more months of clean, fresh tasting ice and water.

The only water and ice filter approved for Whirlpool®, Maytag®, Amana®, KitchenAid® and JennAir® refrigerators.*

*everydrop® products and the recommending brands' products are all owned and distributed by Whirlpool Corporation.
3 سال پیش در تاریخ 1400/09/22 منتشر شده است.
164,595 بـار بازدید شده
... بیشتر