RGB DOUBLE HELIX LAMP - 3D printed, Arduino driven WS2812B Neopixels
14.2 هزار بار بازدید -
3 سال پیش
-
3D printed double helix lampprinting
3D printed double helix lamp
printing hints:
all 3d parts can print without support, only add brim to some parts (diffusers and helix),
I printed this diffusers with glow in the dark PLA in vase mode verry slowly (16 minutes per part),
print height for helix needed is 200 mm (print time 5 hours per part),
3d files in my thingiverse account:
https://www.thingiverse.com/hedo/designs
electronic parts :
arduino nano
WS2812B strip 2x 14 LED's (60 leds per meter) 10 mm width!
micro switch (6x6x10)
power outlet and power supply (or use usb power)
In my video I have used some examples from the fastled library to show you some possible effects and how beautiful a rainbow can look. ;)
I am very curious about the programs and functions that you implement. Would be great if one or the other would share their example code.
printing hints:
all 3d parts can print without support, only add brim to some parts (diffusers and helix),
I printed this diffusers with glow in the dark PLA in vase mode verry slowly (16 minutes per part),
print height for helix needed is 200 mm (print time 5 hours per part),
3d files in my thingiverse account:
https://www.thingiverse.com/hedo/designs
electronic parts :
arduino nano
WS2812B strip 2x 14 LED's (60 leds per meter) 10 mm width!
micro switch (6x6x10)
power outlet and power supply (or use usb power)
In my video I have used some examples from the fastled library to show you some possible effects and how beautiful a rainbow can look. ;)
I am very curious about the programs and functions that you implement. Would be great if one or the other would share their example code.
3 سال پیش
در تاریخ 1400/01/11 منتشر شده
است.
14,266
بـار بازدید شده