Nomad 883 + Meshcam Tutorial - Importing STL and creating GCode
19.8 هزار بار بازدید -
9 سال پیش
-
A tutorial on how to
A tutorial on how to import an stl file into Meshcam, manipulating it to fit a particular stock, and saving the file as GCode to be opened in Carbide Motion and cut on the Nomad 883 CNC mill.
Disclaimer: I am a complete n00b when it comes to CNC machining, so I may not be providing the absolute best advice. This is however what safely worked for me and resulted in some great CNC cuts! Your results may vary - so be careful when you're dealing with this and any type of machinery!
Meshcam Software
http://www.grzsoftware.com
Carbide Motion
http://carbide3d.com/downloads/
Disclaimer: I am a complete n00b when it comes to CNC machining, so I may not be providing the absolute best advice. This is however what safely worked for me and resulted in some great CNC cuts! Your results may vary - so be careful when you're dealing with this and any type of machinery!
Meshcam Software
http://www.grzsoftware.com
Carbide Motion
http://carbide3d.com/downloads/
9 سال پیش
در تاریخ 1394/02/03 منتشر شده
است.
19,841
بـار بازدید شده