Recoil Starter Rope Replacement for Honda & Other Small Engines

Joel at Earth Tools walks through the replacement of a recoil starter rope on a Honda engine. This procedure works on most small engines. NOTE: If the starter you are working on does not have the "slots" in the housing or pulley to stick a screwdriver through to "lock" the pulley in place, you can usually stick a flat-tip screwdriver in-between the outer edge of the pulley and the inside of the recoil housing, to "wedge" the pulley in place. (might have to bop the screwdriver a bit to wedge it down in there good, so it doesn't slip out) Learn more at www.earthtools.com TIMESTAMPS 00:00 Intro 01:43 Procedure Start 03:02 If Your Rope Has Broken 05:10 Replacing Broken Handle 05:30 Replacing Rope 07:45 Troubleshooting

• #science_technology
• #honda_recoil
• #bcs_tiller
• #recoil_rope_replacement
• #bcs_repair
• #bcs_recoil_starter_repair
• #grillo_starter_repair
• #bcs_starter_repair
• #recoil_starter_repair
• #honda_starter_repair
• #honda_starter_fix
• #honda_rope_replacement
• #bcs_rope_replacement
• #grillo_rope_replacement
• #honda_gx_rope_repair