Testing Servo Motors using Centroid CNC "Quick Test"
12.7 هزار بار بازدید -
7 سال پیش
-
Version 2. :-) In this
Version 2. :-)
In this video, using Centroid CNC's Technical Bulletin 155, I show how to do a quick bench test on a paire of servo motors before connecting them to the Centroid All in One DC motion controller. If you connect a motor that does not pass the test, you may damage the servo amplifier on the All in One DC.
TB155 can be found here: http://www.centroidcnc.com/dealersupp...
In this video, using Centroid CNC's Technical Bulletin 155, I show how to do a quick bench test on a paire of servo motors before connecting them to the Centroid All in One DC motion controller. If you connect a motor that does not pass the test, you may damage the servo amplifier on the All in One DC.
TB155 can be found here: http://www.centroidcnc.com/dealersupp...
7 سال پیش
در تاریخ 1396/08/26 منتشر شده
است.
12,743
بـار بازدید شده