Comment CHANGER les PLAQUETTES, DISQUES et mâchoires de freins arrières sur BMW ?
141.6 هزار بار بازدید -
5 سال پیش
-
I replace the rear brake
I replace the rear brake pads, disc ans shoes on a BMW 528i E39.
The system is quite similar on BMW with rear disc brakes:
1-séries E87 E81, 3-series E46, 5-series E60, 7-series E38, and so on...
I show you how the brake pads wear sensor works.
I adjust the hand brake at the disc.
0:00 Intro, car on jack stand, wheel remove
1:21 Rear brake pads remove
4:07 Mounting support remove
5:07 Brake disc remove
7:02 Brake shoes remove
7:51 New brake shoes assembly
8:36 Brake shoes refit
9:27 Disk and mounting support refit
10:40 Caliper piston pushing
12:03 Brake pads refit
13:20 Pad wear sensor refit (rear right)
14:38 Pad wear sensor analysis
16:10 Hand brake adjustement near the brake shoes
Parts you show in this video :
Rear brake pads : Bosch 0986494009
Rear antinoise springs : Bosch 1987474268
2 rear disc: Bosch 0986478426
4 rear brakes shoes : Bosch 1987475090
Rear springs : Bosch 1987475090
If you like this video, you can share it, comment it, add a thum up or consider subscribe.
This video isn't sponsored.
This video has been created for practical, educational, and sharing purposes. It neither constitutes nor replaces a genuine specialized technical manual. EnjoyWheels provides no warranties of any kind and disclaims all liability for the information contained in the videos.
Under no circumstances can the author be held accountable by viewers for any adverse effects resulting from the use of the information presented in the content.
EnjoyWheels recommends wearing personal safety equipment when carrying out tasks similar to those shown in the videos on this channel.
If you are uncertain about the potential dangers of an operation, its consequences, or your own ability to perform it, seek assistance from a professional.
The system is quite similar on BMW with rear disc brakes:
1-séries E87 E81, 3-series E46, 5-series E60, 7-series E38, and so on...
I show you how the brake pads wear sensor works.
I adjust the hand brake at the disc.
0:00 Intro, car on jack stand, wheel remove
1:21 Rear brake pads remove
4:07 Mounting support remove
5:07 Brake disc remove
7:02 Brake shoes remove
7:51 New brake shoes assembly
8:36 Brake shoes refit
9:27 Disk and mounting support refit
10:40 Caliper piston pushing
12:03 Brake pads refit
13:20 Pad wear sensor refit (rear right)
14:38 Pad wear sensor analysis
16:10 Hand brake adjustement near the brake shoes
Parts you show in this video :
Rear brake pads : Bosch 0986494009
Rear antinoise springs : Bosch 1987474268
2 rear disc: Bosch 0986478426
4 rear brakes shoes : Bosch 1987475090
Rear springs : Bosch 1987475090
If you like this video, you can share it, comment it, add a thum up or consider subscribe.
This video isn't sponsored.
This video has been created for practical, educational, and sharing purposes. It neither constitutes nor replaces a genuine specialized technical manual. EnjoyWheels provides no warranties of any kind and disclaims all liability for the information contained in the videos.
Under no circumstances can the author be held accountable by viewers for any adverse effects resulting from the use of the information presented in the content.
EnjoyWheels recommends wearing personal safety equipment when carrying out tasks similar to those shown in the videos on this channel.
If you are uncertain about the potential dangers of an operation, its consequences, or your own ability to perform it, seek assistance from a professional.
5 سال پیش
در تاریخ 1398/03/18 منتشر شده
است.
141,651
بـار بازدید شده