How To Develop Film At Home
384.5 هزار بار بازدید -
7 سال پیش
-
Here is what you'll need!HOW
Here is what you'll need!
HOW TO DEVELOP FILM AT HOME
MATERIALS
Can opener
Scissors
3 mason jars
Instant coffee (caffeinated)
Water
Vitamin C powder
Washing soda
Photo fixer
Film developing tank with reels
Undeveloped black & white film
RECIPES
MASON JAR 1 (DEVELOPER PT. 1)
6 ounces water
5 teaspoons instant coffee (not decaffeinated)
½ teaspoon Vitamin C powder
MASON JAR 2 (DEVELOPER PT. 2)
6 ounces water
3½ teaspoons washing soda
MASON JAR 3 (FIXER)
Mix fixer separately
9 ounces water
3 ounces fixer
INSTRUCTIONS
In a darkroom or a dark bag, pop off the end of your film roll with a can opener. (Do steps 1-5 in a darkroom or bag)
Cut off the first few inches of film with scissors.
Thread the film through a film auto-load reel by matching up the notches and winding it all the way around.
Cut off the end.
Place reel inside developing tank and close the lid.
Mix your chemicals in 3 separate mason jars. Label your jars in advance so they don’t get mixed up.
In the first jar, combine 6 oz water, 5 tsp instant coffee, and ½ tsp Vitamin C powder.
In the second jar, combine 6 oz water and 3½ tsp washing soda.
In the third jar, combine 9 oz water and 3 oz photo fixer.
Combine the first two jars together. This is your developer. The third jar is your fixer.
Pour all of the developer into the film tank and close the lid.
Agitate the tank for an entire minute. Then, agitate it 3 times per minute for 8 minutes. This loosens up any bubbles. After 8 minutes, pour out the developer.
Fill the tank with water and agitate a few times before dumping it out. Do this 3 times to thoroughly rinse the film.
Pour all of the fixer into the tank and close the lid.
Let fixer sit for 5 minutes and agitate 3 times per minute.
Dump out the fixer. Save it if you plan to develop film again because it is reusable.
Rinse film the same way you did in step 13.
Remove the film from the tank. This does not need to be done in a dark room since the film is now developed.
Gently hang the film strip on a clothespin to let it air-dry. You may wipe off any dust with a microfiber cloth or paper towel.
Once dry, either take the film to a professional printer or cut the film into snippets and scan and print them yourself.
Check us out on Facebook! - facebook.com/buzzfeednifty
Credits: https://www.buzzfeed.com/bfmp/videos/...
MUSIC
The Vamp Is Back
Licensed via Warner Chappell Production Music Inc.
VIDEO
Realistic Film Roll
selincevizli/Getty Images
Orange juice being poured into glass
Multi-bits/Getty Images
Coffee Beans Falling Over Background (Super Slow Motion)
simonkr/Getty Images
Loop background with atom model
awstok/Getty Images
HOW TO DEVELOP FILM AT HOME
MATERIALS
Can opener
Scissors
3 mason jars
Instant coffee (caffeinated)
Water
Vitamin C powder
Washing soda
Photo fixer
Film developing tank with reels
Undeveloped black & white film
RECIPES
MASON JAR 1 (DEVELOPER PT. 1)
6 ounces water
5 teaspoons instant coffee (not decaffeinated)
½ teaspoon Vitamin C powder
MASON JAR 2 (DEVELOPER PT. 2)
6 ounces water
3½ teaspoons washing soda
MASON JAR 3 (FIXER)
Mix fixer separately
9 ounces water
3 ounces fixer
INSTRUCTIONS
In a darkroom or a dark bag, pop off the end of your film roll with a can opener. (Do steps 1-5 in a darkroom or bag)
Cut off the first few inches of film with scissors.
Thread the film through a film auto-load reel by matching up the notches and winding it all the way around.
Cut off the end.
Place reel inside developing tank and close the lid.
Mix your chemicals in 3 separate mason jars. Label your jars in advance so they don’t get mixed up.
In the first jar, combine 6 oz water, 5 tsp instant coffee, and ½ tsp Vitamin C powder.
In the second jar, combine 6 oz water and 3½ tsp washing soda.
In the third jar, combine 9 oz water and 3 oz photo fixer.
Combine the first two jars together. This is your developer. The third jar is your fixer.
Pour all of the developer into the film tank and close the lid.
Agitate the tank for an entire minute. Then, agitate it 3 times per minute for 8 minutes. This loosens up any bubbles. After 8 minutes, pour out the developer.
Fill the tank with water and agitate a few times before dumping it out. Do this 3 times to thoroughly rinse the film.
Pour all of the fixer into the tank and close the lid.
Let fixer sit for 5 minutes and agitate 3 times per minute.
Dump out the fixer. Save it if you plan to develop film again because it is reusable.
Rinse film the same way you did in step 13.
Remove the film from the tank. This does not need to be done in a dark room since the film is now developed.
Gently hang the film strip on a clothespin to let it air-dry. You may wipe off any dust with a microfiber cloth or paper towel.
Once dry, either take the film to a professional printer or cut the film into snippets and scan and print them yourself.
Check us out on Facebook! - facebook.com/buzzfeednifty
Credits: https://www.buzzfeed.com/bfmp/videos/...
MUSIC
The Vamp Is Back
Licensed via Warner Chappell Production Music Inc.
VIDEO
Realistic Film Roll
selincevizli/Getty Images
Orange juice being poured into glass
Multi-bits/Getty Images
Coffee Beans Falling Over Background (Super Slow Motion)
simonkr/Getty Images
Loop background with atom model
awstok/Getty Images
7 سال پیش
در تاریخ 1396/02/24 منتشر شده
است.
384,546
بـار بازدید شده