How to Install a Lock-Up Kit 700R4 | Curt's Corner at Monster Transmission
498.1 هزار بار بازدید -
12 سال پیش
-
Monster Transmission Presents Curt's Corner
Monster Transmission Presents Curt's Corner as Curt goes over on how to install a Lockup kit on a 700R4 Transmission.
Items Included:
Oil Pressure Switch with 2 Spade Connectors, 2 Brass Fittings, About 20' of Electrical Wire, 5 Spade Connectors, 2 for the Oil Pressure Switch and 3 for the Toggle Switch, In Line Connectors, and Extension Connectors, 2 Mounting screws for the Toggle Switch, Finally is the pigtail 4 pin connector.
Tools Needed:
A 9/16" wrench, a 3/4" wrench and an adjustable set of pliers and wire strippers, and Teflon tape.
700R4 Lock-Up Kit
http://www.monstertransmission.com/70...
200-4R Lock-Up Kit
http://www.monstertransmission.com/20...
If you have any questions, comments or would like to purchase a lock-up kit give us a call at 1-800-708-0087
Items Included:
Oil Pressure Switch with 2 Spade Connectors, 2 Brass Fittings, About 20' of Electrical Wire, 5 Spade Connectors, 2 for the Oil Pressure Switch and 3 for the Toggle Switch, In Line Connectors, and Extension Connectors, 2 Mounting screws for the Toggle Switch, Finally is the pigtail 4 pin connector.
Tools Needed:
A 9/16" wrench, a 3/4" wrench and an adjustable set of pliers and wire strippers, and Teflon tape.
700R4 Lock-Up Kit
http://www.monstertransmission.com/70...
200-4R Lock-Up Kit
http://www.monstertransmission.com/20...
If you have any questions, comments or would like to purchase a lock-up kit give us a call at 1-800-708-0087
12 سال پیش
در تاریخ 1391/12/22 منتشر شده
است.
498,146
بـار بازدید شده