GoPro Labs version 1.20.70 in Hero 10
1.3 هزار بار بازدید -
3 سال پیش
-
I'm testing the GoPro Hero
I'm testing the GoPro Hero 10 labs firmware version 1.20.70. I wanted to test the max shutter angle feature in low light or even dark (settings: 45, ISO1600). Normally, I need to adjust the shutter speed fast enough to maintain good hypersmooth performance. In the 45 rule the GoPro is adjusting the shutter speed to above my limit which is an amazing feature. I just set the auto shutter speed and forget about it. In my testing, the max shutter angle works like a dream, no issues! Good job by the GoPro, thanks a lot! The hypersmooth performance was very good even though I moved my head a lot (chin mounted). For sure the higher noise is visible because of the ISO1600 but it's not that bad as flickering, ghosting or stuttering video in hypersmooth. With the labs version, the GoPro is the best action camera. So many cool features to play with. The weather was -10C degrees and I didn't see a battery problem, but my video recording time was quite short. I hope they fixed a cold battery issue.
Settings:
4k, 24fps, Super View, Flat color, wb 5500K, Max Shutter Angle 45 with ISO1600, mic wind, Hypersmooth normal
Settings:
4k, 24fps, Super View, Flat color, wb 5500K, Max Shutter Angle 45 with ISO1600, mic wind, Hypersmooth normal
3 سال پیش
در تاریخ 1400/09/29 منتشر شده
است.
1,347
بـار بازدید شده