How to Replace Front Lower Ball Joints 2003-2007 Honda Accord
39.2 هزار بار بازدید -
9 ماه پیش
-
Buy Now!New Ball Joint from
Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00272
This video shows you how to install new, quality TRQ ball joints on your 2003-2007 Honda Accord. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obst/1AXAA00013
• 10mm Socket http://1aau.to/obmo/1AXAA00017
• 17mm Socket http://1aau.to/obGQ/1AXAA00015
• 19mm Socket http://1aau.to/oaoY/1AXAA00043
• 32mm Socket http://1aau.to/odh/1AAST00003
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/ojV/1AXAA00439
• Pickle Fork
• Snap Ring Pliers
• Wire Cutters
• Ratchet http://1aau.to/obKa/1AXAA00016
• Ratcheting Bit Driver
• Socket Extensions http://1aau.to/obGQ/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oaPu/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/oaqU/1AXSS00048
• Rust Penetrant
• Safety Glasses
• sanding disc
• Sandpaper
• Center Punch http://1aau.to/oms/1AXAA00055
• Floor Jack http://1aau.to/oadA/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oZ9/1AXAA00065
• Large C-Clamp
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00272
This video shows you how to install new, quality TRQ ball joints on your 2003-2007 Honda Accord. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obst/1AXAA00013
• 10mm Socket http://1aau.to/obmo/1AXAA00017
• 17mm Socket http://1aau.to/obGQ/1AXAA00015
• 19mm Socket http://1aau.to/oaoY/1AXAA00043
• 32mm Socket http://1aau.to/odh/1AAST00003
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/ojV/1AXAA00439
• Pickle Fork
• Snap Ring Pliers
• Wire Cutters
• Ratchet http://1aau.to/obKa/1AXAA00016
• Ratcheting Bit Driver
• Socket Extensions http://1aau.to/obGQ/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oaPu/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/oaqU/1AXSS00048
• Rust Penetrant
• Safety Glasses
• sanding disc
• Sandpaper
• Center Punch http://1aau.to/oms/1AXAA00055
• Floor Jack http://1aau.to/oadA/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oZ9/1AXAA00065
• Large C-Clamp
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
9 ماه پیش
در تاریخ 1402/08/02 منتشر شده
است.
39,209
بـار بازدید شده