How to Replace Rear Bumper Cover 2003-2007 Honda Accord
6.8 هزار بار بازدید -
9 ماه پیش
-
Shop for New Auto Parts
Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/59/cJ/bumpers-and-parts
This video shows you how to install a new TRQ bumper cover on your 2003-2007 Honda Accord. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver http://1aau.to/obsI/1AXAA00013
• Pocket Screwdriver
• 10mm Socket http://1aau.to/obmJ/1AXAA00017
• Trim Tool Set http://1aau.to/oaiy/1AXXX00006
• Push Pin Pliers
• Ratchet http://1aau.to/obKB/1AXAA00016
• Gloves http://1aau.to/oary/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaeb/1AXAA00068
• Jack Stands http://1aau.to/o2F/1AXAA00065
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: Honda Accord 2003-2007 7th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
This video shows you how to install a new TRQ bumper cover on your 2003-2007 Honda Accord. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver http://1aau.to/obsI/1AXAA00013
• Pocket Screwdriver
• 10mm Socket http://1aau.to/obmJ/1AXAA00017
• Trim Tool Set http://1aau.to/oaiy/1AXXX00006
• Push Pin Pliers
• Ratchet http://1aau.to/obKB/1AXAA00016
• Gloves http://1aau.to/oary/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaeb/1AXAA00068
• Jack Stands http://1aau.to/o2F/1AXAA00065
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: Honda Accord 2003-2007 7th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
9 ماه پیش
در تاریخ 1402/08/04 منتشر شده
است.
6,814
بـار بازدید شده