Drilling and milling with one tool - CMC P&S Square
424 بار بازدید -
3 سال پیش
-
The CrazyMill Cool P&S square
The CrazyMill Cool P&S square stand for very innovative types of milling cutters made of tungsten carbide. Mikron Tool introduces this new 3-flutes milling cutter for the rough and finish milling of many materials, with emphasis on stainless steels, titanium, super alloys and CrCo-alloys. Perfectly suited for feather key milling, but not only.
Due to its special features such as cutting geometry and integrated cooling, CrazyMill Cool P&S is capable of plunging perpendicularly into the material with subsequent milling into solid material and impresses with its speed, performance as well as the high tool life and surface quality. This tool is well adapted for the milling of slots, pockets, and sides in minimal spaces. An example of these applications is the keyway that can be found in transmission shafts.
This micro-cutter is available in diameters from 1 mm to 8 mm (.039” - .315”, fractional inches available) and with milling depth up to 5 x d in these two versions:
• CrazyMill Cool P&S square, type A–milling depth 2.5 x d, cutting length 2.5 x d, through shaft cooling, Z = 3
• CrazyMill Cool P&S square, type C–milling depth 5 x d, cutting length 2 x d, through shaft cooling, Z = 3
Read more!
CrazyMill Cool P&S: www.mikrontool.com/en/Products/CrazyMill-Cool-P-S/…
➨Find your right tool: www.mikrontool.com/de/Tool-finder
More about Mikron Tool
Homepage: www.mikrontool.com/en
Crazy Tools: www.mikrontool.com/en/Products/Crazy-tools
Crazy Services: www.mikrontool.com/en/Services/Consulting
Follow Mikron Tool
LinkedIn: ch.linkedin.com/company/mikron-tool
Contact Mikron Tool
www.mikrontool.com/en/Contact-Locations/Local-Cont…
3 سال پیش
در تاریخ 1400/06/18 منتشر شده
است.
424
بـار بازدید شده