HOT AT ALL TIMES - How to wire an LS ENGINE swap the EASY WAY! - Chevy C10 5.3 LS Swap - UTX

Ugly Truck Experience
Ugly Truck Experience
239.2 هزار بار بازدید - 2 سال پیش - "What's the easiest way to
"What's the easiest way to wire an LS swap?" is a question we hear a lot, and here's your answer!  We're using the original 5.3 wiring harness, PCM, and fuse box, and while all those wires look intimidating, it's actually really simple.  It only takes 3 wires (technically 4) to make this truck start and run.  Firing it up for the first time is always a little nerve-wracking, but this square body started right up and sounded great right from the start.

For more helpful LS Swap videos, click here! LS SWAPS - Tips & Tricks - UGLY TRUCK...

Follow us on Facebook!  fb.com/uglytruck
Check us out on Instagram!  @uglytruckexperience

Want to send us something?  (NEW address!)
7915 E. Division St.
Strafford, MO 65757

Chapters:  
00:00 Intro
00:38 Parts Used - OEM Fuse Box & Harness
01:32 Getting Started
04:17 Power to Interior Fuse Panel
10:15 Power to Fuel Pump
14:30 Hot in Run & Start Circuit
16:16 Starting Circuit
19:27 Power Distribution
21:22 PCM Programming & First Start Prep
23:26 FIRST START

#utx #squarebody #lsswap #c10 #lsc10

C9WWQA06XDYOQNOZ
2 سال پیش در تاریخ 1401/02/15 منتشر شده است.
239,261 بـار بازدید شده
... بیشتر