Carbon Fiber Parts Production
10.6 هزار بار بازدید -
4 سال پیش
-
How its made carbon fiber
How its made carbon fiber by Nissan, Carbon fiber parts production, CRTM CFRP, Japan production
YOKOHAMA, Japan – A material used in airplanes, rockets and sports cars may find its way into more mass-market cars thanks to a new production process developed by Nissan.
The new process speeds up the development of car parts made from carbon fiber reinforced plastics, or CFRP. Lightweight yet extremely strong, the material can be used to make cars that are safer and more fuel efficient. It can also lower a car’s center of gravity when applied to upper body parts, making it more agile and exciting to drive.
Nissan aims to use the new process to mass-produce CFRP parts and introduce them in more cars for customers. The innovation can cut the lead time to develop such components by as much as half, and cycle time for molding by about 80%, compared with conventional methods.
While the benefits of carbon fiber have long been known, it’s expensive compared with other materials such as steel. Along with the difficulty in shaping CFRP parts, this has hampered the mass production of automotive components made from the material.
Nissan found a new approach to the existing production method known as compression resin transfer molding. The existing method involves forming carbon fiber into the right shape and setting it in a die with a slight gap between the upper die and the carbon fibers. Resin is then injected into the fiber and left to harden.
Nissan’s engineers developed techniques to accurately simulate the permeability of the resin in carbon fiber, while visualizing resin flow behavior in a die using an in-die temperature sensor and a transparent die. The result of the successful simulation was a high-quality component with shorter development time.
Carbon fiber parts production,How its made carbon fiber by Nissan,CRTM,CFRP,carbon fiber factory,nissan Autofabrik,fábrica de automóviles nissan,planta de ensamblaje nissan,material de producción carbon,les coulisses de la production carbon,how its made,hinter den Kulissen der Produktion,behind the scenes of production carbon fiber,автомобильный завод nissan,производство,сборка nissan,製造,自動車工場,Linha de produção carbon fibre,japan production
❗️Recondition Dead Batteries“You’ll Never need to buy another battery again!”- https://bit.ly/3f3o1SF
❗️How-To Complete a $6,580.00 Paint Job for Under $200! - https://bit.ly/2KQb6We
❗️The Secrets of Auto Spray Painting & Body Work - https://bit.ly/35nxOyq
👉Instagram: Instagram: carsonline12
👉Facebook: Facebook: CarsOnline-100128914976746
👉Twitter: Twitter: CarsOnline6
👉PayPal: [email protected]
👉Patreon: http://bit.ly/39QkT9C
🔴 Comment & Like 👍
🔴 Subscribe and Share ✔️
🔴 Turn on the bell to never miss an upload! ((🔔))
👉 SUBSCRIBE http://bit.ly/KondorMedia
👉 Car Factory http://bit.ly/CarProduction
👉 Crash Tests 2019 Skoda Karoq - Crash Test - Ancap...
👉 Car Compare Peugeot 208 vs Renault Clio, Clio vs ...
#CarbonFiber
#Nissan
#Carbon
YOKOHAMA, Japan – A material used in airplanes, rockets and sports cars may find its way into more mass-market cars thanks to a new production process developed by Nissan.
The new process speeds up the development of car parts made from carbon fiber reinforced plastics, or CFRP. Lightweight yet extremely strong, the material can be used to make cars that are safer and more fuel efficient. It can also lower a car’s center of gravity when applied to upper body parts, making it more agile and exciting to drive.
Nissan aims to use the new process to mass-produce CFRP parts and introduce them in more cars for customers. The innovation can cut the lead time to develop such components by as much as half, and cycle time for molding by about 80%, compared with conventional methods.
While the benefits of carbon fiber have long been known, it’s expensive compared with other materials such as steel. Along with the difficulty in shaping CFRP parts, this has hampered the mass production of automotive components made from the material.
Nissan found a new approach to the existing production method known as compression resin transfer molding. The existing method involves forming carbon fiber into the right shape and setting it in a die with a slight gap between the upper die and the carbon fibers. Resin is then injected into the fiber and left to harden.
Nissan’s engineers developed techniques to accurately simulate the permeability of the resin in carbon fiber, while visualizing resin flow behavior in a die using an in-die temperature sensor and a transparent die. The result of the successful simulation was a high-quality component with shorter development time.
Carbon fiber parts production,How its made carbon fiber by Nissan,CRTM,CFRP,carbon fiber factory,nissan Autofabrik,fábrica de automóviles nissan,planta de ensamblaje nissan,material de producción carbon,les coulisses de la production carbon,how its made,hinter den Kulissen der Produktion,behind the scenes of production carbon fiber,автомобильный завод nissan,производство,сборка nissan,製造,自動車工場,Linha de produção carbon fibre,japan production
❗️Recondition Dead Batteries“You’ll Never need to buy another battery again!”- https://bit.ly/3f3o1SF
❗️How-To Complete a $6,580.00 Paint Job for Under $200! - https://bit.ly/2KQb6We
❗️The Secrets of Auto Spray Painting & Body Work - https://bit.ly/35nxOyq
👉Instagram: Instagram: carsonline12
👉Facebook: Facebook: CarsOnline-100128914976746
👉Twitter: Twitter: CarsOnline6
👉PayPal: [email protected]
👉Patreon: http://bit.ly/39QkT9C
🔴 Comment & Like 👍
🔴 Subscribe and Share ✔️
🔴 Turn on the bell to never miss an upload! ((🔔))
👉 SUBSCRIBE http://bit.ly/KondorMedia
👉 Car Factory http://bit.ly/CarProduction
👉 Crash Tests 2019 Skoda Karoq - Crash Test - Ancap...
👉 Car Compare Peugeot 208 vs Renault Clio, Clio vs ...
#CarbonFiber
#Nissan
#Carbon
4 سال پیش
در تاریخ 1399/06/14 منتشر شده
است.
10,695
بـار بازدید شده