Eliminating vibration from a 2 piece drive shaft
86.6 هزار بار بازدید -
4 سال پیش
-
I've been chasing down a
I've been chasing down a vibration in my 2 piece driveline for a while, and it all started when I lowered the truck and re-geared the rear-end. The vibration stemmed from two causes: incorrect working angles on the universal joints from a carrier bearing relocation kit, and some worn out components like the carrier bearing and universal joints. It's not too bad to fix at all, and the parts cost less than $100 to make the repair.
Plus, I give a quick review on the 4.30 gears I've had in for a few weeks now, and they are a blast to drive!
Visit tolmanperformance.com/collections/all and grab a shirt or hat today!
Don't forget to like and subscribe to the channel, and for more behind the scenes content and pictures of projects, you can Follow us on FaceBook
Facebook: LTtolman
For business inquiries, email [email protected]
Plus, I give a quick review on the 4.30 gears I've had in for a few weeks now, and they are a blast to drive!
Visit tolmanperformance.com/collections/all and grab a shirt or hat today!
Don't forget to like and subscribe to the channel, and for more behind the scenes content and pictures of projects, you can Follow us on FaceBook
Facebook: LTtolman
For business inquiries, email [email protected]
4 سال پیش
در تاریخ 1399/02/27 منتشر شده
است.
86,697
بـار بازدید شده