Solved - Electronic Brake Control Module Repair Install (Ford Escape)
81.9 هزار بار بازدید -
2 سال پیش
-
Update - if you have
Update - if you have tried to remove the EBCM without removing the brake line from the ABS assembly on a ford escape (possibly by removing the ABS assembly frame bolts to provide additional access please let me know. It still bothers me that for this vehicle the only way to remove the EBCM is to pull the entire assembly and if it is not necessary that would be valuable info.
0:00 Introduction and Trouble Codes
0:37 EBCM unboxing from UpFix Repair and Cleaning
1:02 EBCM Mounting to ABS Pump
1:48 ABS Assembly Installation
3:53 ABS Brake Fluid Leak Check and Bleed
4:46 Final ODBII Trouble Code Check and Conclusion
This video shows the installation of a 2012 Ford Escape Electronic Brake Control Module ABS Assembly. The steps shown should be applicable to most of not all ABS assembly unit replacements.
Prior to the removal of the EBCM the car has ODB code error B1342 and ABS/brake light indicators.
See the test and removal video here: Solved - ABS light flashing B1343 co...
Forums had suggested that with these symptoms the EBCM is in need of repair. To access and remove the EBCM the ABS module assembly was removed and the EBCM was pulled off the assembly and shipped to a company called Upfix for repairs. Upfix replaced some electronics to repair the EBCM and shipped it back to us fully repaired.
After installation our Ford Escape is back up and running!
If you want to know how to install the EBCM or ABS assembly on your car and do it yourself, this is the right video for you.
Foxwell scanner/bleeder: https://amzn.to/3KfmWrB
Power bleeder: https://amzn.to/3WT87m0
Aluminum Catch Pans: https://amzn.to/4bLx2gd
Electronics Cleaner: https://amzn.to/4dWqBrS
Torx screwdriver set: https://amzn.to/44TzSNe
0:00 Introduction and Trouble Codes
0:37 EBCM unboxing from UpFix Repair and Cleaning
1:02 EBCM Mounting to ABS Pump
1:48 ABS Assembly Installation
3:53 ABS Brake Fluid Leak Check and Bleed
4:46 Final ODBII Trouble Code Check and Conclusion
This video shows the installation of a 2012 Ford Escape Electronic Brake Control Module ABS Assembly. The steps shown should be applicable to most of not all ABS assembly unit replacements.
Prior to the removal of the EBCM the car has ODB code error B1342 and ABS/brake light indicators.
See the test and removal video here: Solved - ABS light flashing B1343 co...
Forums had suggested that with these symptoms the EBCM is in need of repair. To access and remove the EBCM the ABS module assembly was removed and the EBCM was pulled off the assembly and shipped to a company called Upfix for repairs. Upfix replaced some electronics to repair the EBCM and shipped it back to us fully repaired.
After installation our Ford Escape is back up and running!
If you want to know how to install the EBCM or ABS assembly on your car and do it yourself, this is the right video for you.
Foxwell scanner/bleeder: https://amzn.to/3KfmWrB
Power bleeder: https://amzn.to/3WT87m0
Aluminum Catch Pans: https://amzn.to/4bLx2gd
Electronics Cleaner: https://amzn.to/4dWqBrS
Torx screwdriver set: https://amzn.to/44TzSNe
2 سال پیش
در تاریخ 1401/05/30 منتشر شده
است.
81,984
بـار بازدید شده