How to start MindCuber-RI Rubik Solver for Mindstorms Robot Inventor 51515
14.7 هزار بار بازدید -
3 سال پیش
-
The video shows how to
The video shows how to start the program for MindCuber-RI by David Gilday.
There are instructions at David’s site (https://www.mindcuber.com/mindcuberri...) but if you get stuck, maybe this video will help.
After running the first two programs, you might get a message “The hub OS needs to be updated”. The update is probably not needed and, if you do it, the loaded programs will be erased, and you will have to start again. In case of the message, you should unplug the hub, turn it off, wait a bit, turn it on and connect the hub again.
You can see the video of the solver in action at MindCuber-RI - Rubik Solver for Minds...
There are instructions at David’s site (https://www.mindcuber.com/mindcuberri...) but if you get stuck, maybe this video will help.
After running the first two programs, you might get a message “The hub OS needs to be updated”. The update is probably not needed and, if you do it, the loaded programs will be erased, and you will have to start again. In case of the message, you should unplug the hub, turn it off, wait a bit, turn it on and connect the hub again.
You can see the video of the solver in action at MindCuber-RI - Rubik Solver for Minds...
3 سال پیش
در تاریخ 1400/02/26 منتشر شده
است.
14,731
بـار بازدید شده