Simatic STEP 7: Set IP address in user program with FB55 IP_CONFIG

This video is a small demo on how to set-up IP address in user program by the help of the function block FB55 - IP_CONFIG.

Used software:
- SIMATIC STEP 7 v5.7
- TIA PORTAL WinCC Advanced v15.1

Used hardware:
- S7 315-2DP 6S7 315-2AG10-0AB0
- S7 343-1 Lean 6S7 343-1CX10-0XE0
- TP900 Comfort 6AV2 124-0CJC01-0AX0

If you find this video useful - thank me, or buy me a coffe :=] https://bmc.link/defacto
Support: https://whydonate.com/en/fundraising/...

Industrial Ethernet CP  Order number  Firmware
CP443-1 Advanced  6GK7443-1EX40-0XE0  V1.0.33
CP443-1 Advanced  6GK7443-1EX41-0XE0  V1.0.23
CP443-1 Advanced  6GK7443-1GX20-0XE0  V2.0.49
CP443-1 Advanced  6GK7443-1GX30-0XE0  V3.0
CP443-1 Standard  6GK7443-1EX20-0XE0  V1.0.26
CP443-1 Standard  6GK7443-1EX30-0XE0  V3.0
CP343-1 Advanced  6GK7343-1GX21-0XE0  V1.0
CP343-1 Advanced  6GK7343-1GX30-0XE0  V1.0
CP343-1 Advanced  6GK7343-1GX31-0XE0  V3.0
CP343-1 Standard  6GK7343-1EX21-0XE0  V1.0
CP343-1 Standard  6GK7343-1EX30-0XE0  V2.0
CP343-1 Lean   6GK7343-1CX10-0XE0  V1.0

• #science_technology
• #siemens_automation
• #simatic
• #tia_portal
• #plc
• #siemens
• #cpu_status
• #communication
• #cpu_control
• #step_7
• #step_7_v57
• #cpu_315_2dp
• #cp_343_1_lean
• #tp_900_comfort
• #organization_block
• #ip_address
• #fb55
• #ob100
• #ip_config